GB/T 18166-2008
AbolishedSpecifications of amusement rides monorail category
架空游览车类游艺机通用技术条件
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 总则 → 4 基本设计规定 → 5 传动系统 → 6 电气控制系统 → 7 轨道和立柱 → 8 车辆 → 9 安全设施 → 10 制造与安装 → 11 试验方法 → 12 检验规则 Foreword → 1 Scope → 2 Normative References → 3 General Principles → 4 Basic Design Requirements → 5 Transmission System → 6 Electrical Control System → 7 Track and Columns → 8 Vehicles → 9 Safety Facilities → 10 Manufacturing and Installation → 11 Test Methods → 12 Inspection Rules
Scope
This standard specifies the general technical conditions and technical requirements for amusement rides of the monorail category. This standard applies to the design, manufacture, installation, modification, maintenance, test, inspection and use management of amusement rides of the monorail category.
本标准规定了架空游览车类游艺机的通用技术条件和技术要求。本标准适用于架空游览车类游艺机的设计、制造、安装、改造、维修、试验、检验和使用管理。
Normative References
Keywords
Application Summary AI generated
Designers, manufacturers, installers, modifiers, maintenance companies, and inspection bodies of monorail amusement rides use this standard. They apply it to ensure the safety, reliability, and technical compliance of such rides. This standard matters because it harmonizes technical requirements and protects the safety of passengers and operators.
架空游览车类游艺机的设计单位、制造厂家、安装公司、改造和维修企业以及检验机构使用本标准。他们用它来确保架空游览车的安全性、可靠性和技术合规性。该标准重要是因为它统一了技术要求，保障了乘客和操作人员的人身安全。
AI Summary AI generated
This standard specifies general technical conditions and requirements for monorail amusement rides, covering design, manufacture, installation, modification, maintenance, test, inspection, and use management. It includes provisions on basic design, transmission systems, electrical control, tracks and columns, vehicles, safety facilities, manufacturing, installation, test methods, and inspection rules, referencing multiple national standards. Compared to the 2000 version, this edition adds several chapters and strengthens safety requirements, design calculations, and specifications for key components.
本标准规定了架空游览车类游艺机的通用技术条件和技术要求，适用于其设计、制造、安装、改造、维修、试验、检验和使用管理。标准涵盖了基本设计规定、传动系统、电气控制系统、轨道和立柱、车辆、安全设施、制造与安装、试验方法和检验规则等内容，并引用了多项相关国家标准。与2000年版相比，本标准增加了多个章节，强化了安全要求、设计计算和关键部件的规范。
Key Sentences extracted from text
本标准规定了架空游览车类游艺机的通用技术条件和技术要求。
架空游览车类游艺机的设计、制造、安装、改造、维修、试验、检验和使用管理，应执行本标准并符合GB 8408的有关规定。
架空游览车的设计应有设计说明书、设计计算书、安全分析及符合国家有关标准的全套设计。
增加了对电气控制系统和采用可编程控制器时应遵循的要求。
增加了轨道和立柱的构造要求，增加了对温度应力的控制要求。
This standard specifies the general technical conditions and technical requirements for amusement rides of the monorail category.
The design, manufacture, installation, modification, maintenance, test, inspection and use management of monorail amusement rides shall comply with this standard and the relevant provisions of GB 8408.
The design of monorail amusement rides shall include design specifications, design calculation documents, safety analysis, and a complete set of designs conforming to relevant national standards.
Requirements for electrical control systems and for the use of programmable controllers have been added.
Structural requirements for tracks and columns have been added, and requirements for control of temperature stress have been added.
Standard Timeline
Changes from replaced version:
- 第1章"范围"增加了架空游览车的设计、制造、改造、检验和安装
- 增加了第5章"传动系统"、第6章"电气控制系统"、第7章"轨道和立柱"、第8章"车辆"、第9章"安全设施"、第10章"制造与安装"
- 将原"技术要求"修改为第4章"基本设计规定"，增加了设计要考虑的各种载荷和设计计算（包括最小刚度计算、疲劳强度等）
- 第6章"电气控制系统"增加了对电气控制系统和采用可编程控制器时应遵循的要求，增加了对变压器的要求
- 第7章"轨道和立柱"增加了轨道和立柱的构造要求，增加了对温度应力的控制要求
- 第8章"车辆"增加了脚踏板的要求
- 第9章"安全设施"增加了安全标志的要求
- 第11章"试验方法"删掉了电气参数测量
- 第12章"检验规则"增加了三类产品缺陷：无紧急停车按钮和按钮型式不符合要求；安全把手脚踏板损坏、失效；无紧急救援措施
- 增加了附录（规范性附录）关于"重要部件"、"重要轴、销轴"和"重要焊缝"的规定
- Chapter 1 'Scope' added design, manufacture, modification, inspection and installation of monorail amusement rides
- Added Chapter 5 'Transmission System', Chapter 6 'Electrical Control System', Chapter 7 'Track and Columns', Chapter 8 'Vehicles', Chapter 9 'Safety Facilities', Chapter 10 'Manufacturing and Installation'
- Original 'Technical Requirements' revised to Chapter 4 'Basic Design Requirements', added various loads to be considered in design and design calculations (including minimum stiffness calculation, fatigue strength, etc.)
- Chapter 6 'Electrical Control System' added requirements for electrical control systems and for use of programmable controllers, added requirements for transformers
- Chapter 7 'Track and Columns' added structural requirements for tracks and columns, added requirements for control of temperature stress
- Chapter 8 'Vehicles' added requirements for foot pedals
- Chapter 9 'Safety Facilities' added requirements for safety signs
- Chapter 11 'Test Methods' deleted electrical parameter measurement
- Chapter 12 'Inspection Rules' added three types of product defects: no emergency stop button and button type nonconforming; safety handle or foot pedal damaged or失效; no emergency rescue measures
- Added annex (normative) on 'Important Components', 'Important Shafts and Pins', and 'Important Welds'