GB/T 18161-2008
AbolishedSpecifications of amusement rides of tower category
飞行塔类游艺机通用技术条件
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 总则 → 4 基本设计规定 → 5 电气与控制系统 → 6 安全要求与安全设施 → 7 制造与安装 → 8 试验与检验 Foreword → 1 Scope → 2 Normative References → 3 General Principles → 4 Basic Design Requirements → 5 Electrical and Control Systems → 6 Safety Requirements and Safety Facilities → 7 Manufacturing and Installation → 8 Testing and Inspection
Scope
This standard specifies the general technical conditions and technical requirements for amusement rides of tower category. This standard applies to the design, manufacture, installation, modification, maintenance, testing, inspection and use management of amusement rides of tower category.
本标准规定了飞行塔类游艺机的通用技术条件和技术要求。本标准适用于飞行塔类游艺机的设计、制造、安装、改造、维修、试验、检验和使用管理。
Normative References
Keywords
Application Summary AI generated
Manufacturers, installation companies, inspection agencies, and operators of amusement rides use this standard to ensure that tower category rides meet safety and technical requirements during design, manufacturing, installation, modification, maintenance, testing, inspection, and operation. It establishes unified technical specifications to guarantee safe operation, prevent accidents, and protect the safety of passengers and operators.
游乐设备制造商、安装公司、检验机构和运营单位使用本标准，确保飞行塔类游艺机在设计、制造、安装、改造、维修、试验、检验和使用管理各环节符合安全和技术要求。该标准通过统一技术规范，保障设备安全运行，防止事故发生，保护乘客和操作人员的人身安全。
AI Summary AI generated
GB/T 18161-2008 'Specifications of amusement rides of tower category' replaces GB 18161-2000 and specifies general technical conditions and requirements for tower category amusement rides. It applies to design, manufacturing, installation, modification, maintenance, testing, inspection, and operation management. The standard adds a general principles chapter, clarifies terminology, strengthens design provisions, electrical and control systems, safety requirements and facilities, manufacturing and installation, and testing and inspection, referencing multiple related standards to ensure safe operation.
GB/T 18161-2008《飞行塔类游艺机通用技术条件》替代了GB 18161-2000，规定了飞行塔类游艺机的通用技术条件和技术要求，适用于设计、制造、安装、改造、维修、试验、检验和使用管理。标准增加了总则章节，明确了术语定义，强化了设计规定、电气与控制系统、安全要求与安全设施、制造与安装、试验与检验等方面的内容，并引用了多项相关标准以确保设备安全运行。
Key Sentences extracted from text
本标准规定了飞行塔类游艺机的通用技术条件和技术要求。
飞行塔类游艺机是指乘人部分用挠性件吊挂，边升降边绕垂直轴回转及运动形式类似的游艺机。
飞行塔类游艺机的设计、制造、安装、改造、维修、试验、检验和使用管理，应执行本标准和GB 8408-2008的有关规定。
飞行塔类游艺机设计、制造、安装和使用应保证人身安全。
本标准未提到的其他要求，均应按国家有关标准、规范和规定执行。
This standard specifies the general technical conditions and technical requirements for amusement rides of tower category.
Amusement rides of tower category refer to amusement rides where the passenger-carrying part is suspended by flexible members, rotating around a vertical axis while ascending and descending, and similar motion forms.
The design, manufacture, installation, modification, maintenance, testing, inspection and use management of amusement rides of tower category shall comply with this standard and relevant provisions of GB 8408-2008.
The design, manufacture, installation and use of amusement rides of tower category shall ensure personal safety.
Other requirements not mentioned in this standard shall be implemented in accordance with relevant national standards, specifications and regulations.
Standard Timeline
Changes from replaced version:
- 第1章'范围'明确了飞行塔类游艺机的设计、制造、安装、改造、维修、试验、检验和使用管理
- 增加了第3章'总则'，对飞行塔类游艺机名词术语集中进行了解释
- 第4章'基本设计规定'增加了鼓励采用新产品开发的标准支持的内容；增加了设计要求的各种载荷和载荷组合；增加了工况条件选择及设计原则；增加了对高大设备的设计要求；增加了对加速度的要求
- 第5章'电气与控制系统'主要增加和修改了以下内容:6.5~6.12增加了对避雷装置的要求；增加了对照明灯具的要求；增加了对升降系统限位控制装置的要求；修改了对电气安装的要求；修改了对装饰照明电压的要求
- 第7章'安全要求与安全设施'增加了安全标识的要求；增加了紧急疏导措施的要求；增加了对安全钳、限速器的要求
- 第8章'制造与安装'增加了对安装过程控制的要求
- 第10章'检验与试验'增加了对检验的要求
- Clause 1 'Scope' clarified the design, manufacture, installation, modification, maintenance, testing, inspection and use management of tower category amusement rides
- Added Clause 3 'General Principles', which centrally explains the terminology of tower category amusement rides
- Clause 4 'Basic Design Requirements' added content encouraging adoption of new product development standards; added various loads and load combinations for design requirements; added operating condition selection and design principles; added design requirements for large equipment; added requirements for acceleration
- Clause 5 'Electrical and Control Systems' mainly added and modified the following: 6.5~6.12 added requirements for lightning protection devices; added requirements for lighting fixtures; added requirements for lifting system limit control devices; modified requirements for electrical installation; modified requirements for decorative lighting voltage
- Clause 7 'Safety Requirements and Safety Facilities' added requirements for safety signs; added requirements for emergency evacuation measures; added requirements for safety gears and speed limiters
- Clause 8 'Manufacturing and Installation' added requirements for installation process control
- Clause 10 'Testing and Inspection' added requirements for inspection