NY/T 5176-2002

Abolished

Pollution-free Food - Technical Regulation for Longan Production

无公害食品 龙眼生产技术规程

Standard Type
NY
ICS
65.020.20
CCS
B31
Status
Abolished
Issue Date
2002-07-25
Implementation
2002-09-01
Centralized Committee
中华人民共和国农业部 / Ministry of Agriculture of the People's Republic of China
Issuing Authority
中华人民共和国农业部 / Ministry of Agriculture of the People's Republic of China

Catalogue

前言 → 1 范围 → 2 规范性引用文件 → 3 生产技术要求 Foreword → 1 Scope → 2 Normative References → 3 Technical Requirements for Production

Scope

This standard specifies the technical management requirements for the production of pollution-free food longan [Euphoria longan (Lour) Steud], including orchard selection and planning, planting varieties and methods, soil, fertilizer and water management, pruning and shaping, flower and fruit management, pest control, and harvesting. This standard is applicable to the production of pollution-free longan.

本标准规定了无公害食品龙眼 [ Euphoria longan (Lour) Steud] 的生产园地选择与规划、栽种品种与栽植方法、土肥水管理、修枝整形与花果管理、病虫害防治及采收等技术管理要求。本标准适用于无公害龙眼的生产。

Normative References

GB 4285 NY/T 354 GB/T 8321 (所有部分) NY/T 227 NY/T 391-2000 NY 5023 NY 5175

Keywords

无公害食品 (pollution-free food) 龙眼 (longan) 生产技术规程 (technical regulation for production) 园地选择 (orchard selection) 栽种 (planting) 病虫害防治 (pest control) 采收 (harvesting)

Application Summary AI generated

Longan growers and agricultural technicians use this standard to regulate the production process of pollution-free longan. They follow it for orchard selection, planting, soil and water management, and pest control to ensure the product meets pollution-free food requirements. This standard is important for improving longan quality, ensuring food safety, and promoting sustainable agricultural development.

龙眼种植户和农业技术人员使用本标准来规范无公害龙眼的生产过程。他们依据本标准进行园地选择、栽种、土肥水管理和病虫害防治,以确保龙眼产品符合无公害食品要求。本标准对提高龙眼品质、保障食品安全和促进可持续农业发展具有重要意义。

AI Summary AI generated

This standard specifies the technical requirements for the entire production process of pollution-free longan, including orchard selection and planning, variety selection, planting methods, soil, fertilizer and water management, pruning and shaping, flower and fruit management, pest control, and harvesting. The orchard must meet the environmental requirements of NY 5023, with soil organic matter content ≥1%, pH 5.5~6.5, and annual average temperature 20~23.5°C. Seedling quality shall comply with NY/T 354, and planting density is adjusted according to terrain. The standard applies to pollution-free longan production, aiming to ensure product quality and food safety.

本标准规定了无公害龙眼生产的全过程技术要求,包括园地选择与规划、品种选择、栽种方法、土肥水管理、修枝整形、花果管理、病虫害防治及采收。园地需符合NY 5023环境要求,土壤有机质含量≥1%,pH 5.5~6.5,年均温20~23.5°C。苗木质量按NY/T 354执行,种植密度根据地形调整。标准适用于无公害龙眼的生产,旨在保障产品质量和食品安全。

Key Sentences extracted from text

1.

园地环境符合 NY 5023 的要求,土壤和气候等条件适合龙眼生长。

2.

坡度在 20° 以下。土壤质地良好,有机质含量 1% 以上,pH 5.5~6.5。

3.

年均温 20~23.5°C,最低月平均温度高于 11°C,多年平均极端低温高于 -1.5°C。

4.

苗木质量按 NY/T 354 执行。

5.

可采用株行距为 5 m×6 m、4 m×6 m 或 4 m×5 m 的种植密度,平地和土壤肥力较好的园地宜疏植,坡度较大的园地可适当缩小行间距,密植的园地后期视植株生长情况进行疏伐。

7.

The orchard environment shall comply with the requirements of NY 5023, and the soil and climate conditions shall be suitable for longan growth.

8.

The slope shall be below 20°. The soil texture shall be good, with organic matter content above 1% and pH 5.5~6.5.

9.

The annual average temperature shall be 20~23.5°C, the lowest monthly average temperature shall be above 11°C, and the multi-year average extreme low temperature shall be above -1.5°C.

10.

Seedling quality shall comply with NY/T 354.

11.

Planting densities such as 5 m×6 m, 4 m×6 m or 4 m×5 m may be adopted; flat land and fertile orchards should be sparsely planted, while orchards on steeper slopes may appropriately reduce row spacing; densely planted orchards should be thinned later according to plant growth.

Related Standards

Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.