NY/T 1057-2006
ActiveTechnical specification for cottonseed delinting by excessive dilute sulphuric acid
棉种过量式稀硫酸脱绒技术规范
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 术语和定义 → 4 要求 Foreword → 1 Scope → 2 Normative References → 3 Terms and Definitions → 4 Requirements
Scope
This standard specifies the terms and definitions, requirements, and testing methods for cottonseed delinting by excessive dilute sulphuric acid. This standard applies to cottonseed delinting by excessive dilute sulphuric acid.
本标准规定了棉种过量式稀硫酸脱绒术语和定义、要求、检测方法。本标准适用于棉种过量式稀硫酸脱绒。
Normative References
Keywords
Application Summary AI generated
Seed processing companies and agricultural technicians use this standard to regulate the process of cottonseed delinting with excessive dilute sulphuric acid. It ensures technical consistency and seed quality during delinting, improving cotton planting efficiency. By specifying key steps such as raw material requirements, acid supply, liquid removal, and drying, it safeguards the safety and effectiveness of seed treatment.
种子加工企业和农业技术人员使用本标准来规范棉种过量式稀硫酸脱绒工艺。该标准确保脱绒过程的技术一致性和种子质量，提高棉花种植效率。它通过明确原料要求、供料供酸、脱液烘干等关键步骤，保障种子处理的安全性和有效性。
AI Summary AI generated
NY/T 1057-2006 'Technical specification for cottonseed delinting by excessive dilute sulphuric acid' specifies terms, definitions, technical requirements, and testing methods for cottonseed delinting using excessive dilute sulphuric acid. It applies to cottonseed processing, requiring continuous and uniform feeding, complete soaking of fuzz seeds with dilute acid, centrifugal liquid removal, and drying with strict temperature control (seed outlet temperature ≤54°C). Finally, delinting is done in a friction machine. The standard combines mandatory and recommended clauses, proposed and supervised by the Ministry of Agriculture.
NY/T 1057-2006《棉种过量式稀硫酸脱绒技术规范》规定了棉种过量式稀硫酸脱绒的术语、定义、技术要求和检测方法。标准适用于棉种脱绒加工，要求供料连续均匀，稀硫酸完全浸润毛子，经离心脱液后烘干，烘干温度控制严格，种子出口温度不超过54℃。最后通过摩擦机脱绒，确保种子处理质量。该标准为强制性条文与推荐性条文结合，由农业部提出并归口。
Key Sentences extracted from text
本标准规定了棉种过量式稀硫酸脱绒术语和定义、要求、检测方法。
供料应连续均匀。
向酸反应槽内注入稀硫酸，毛子经搅拌被稀硫酸完全浸润。
烘干机出口处的种子温度不得超过54℃。
毛子在摩擦机内通过时间为15 min-20 min。
This standard specifies the terms and definitions, requirements, and testing methods for cottonseed delinting by excessive dilute sulphuric acid.
Feeding should be continuous and uniform.
Inject dilute sulphuric acid into the acid reaction tank, and the fuzz seeds are completely soaked by the dilute sulphuric acid after stirring.
The seed temperature at the outlet of the dryer shall not exceed 54°C.
The passage time of fuzz seeds in the friction machine is 15 min-20 min.