GB/T 25096-2010
ActiveComposite station post insulators for substations with AC voltages greater than 1000V - Definitions,test methods and acceptance riteria
交流电压高于1000V变电站用电站支柱复合绝缘子 定义、试验方法及接收准则
Application Summary AI generated
This standard defines the terminology, outlines specific test methods, and establishes acceptance criteria for composite station post insulators used in AC substations with voltages exceeding 1000V. It is applied by manufacturers and utilities to verify the mechanical and electrical performance of these insulators, ensuring reliability in high-voltage power transmission and distribution systems. The standard is critical for quality control and procurement in the electrical engineering industry.
Related Standards
GB/T 19443-2004
Insulators for overhead lines with a nominal voltage above 1000V--Ceramic or glass insulator units for d.c. systems--Difinitions，test methods and acceptance criteria
GB/T 4585-2004
Artificial pollution tests on high-voltage insulators to be used on a.c. systems
GB/Z 23756.1-2009
Evaluation of electrical endurance of electrical insulation systems - Part 1: General considerations and evaluation procedures based on normal distributions
GB/Z 16935.2-2013
Insulation coordination for equipment within low-voltage systems―Part 2-1: Application guide-Explanation of the application of the IEC 60664 series, dimensioning example and dielectric testing
GB/Z 16935.6-2016
Insulation coordination for equipment within low-voltage systems—Part 2-2: Interface considerations—Application guide
GB/Z 37754-2019
Guidance on clearances and creepage distances in particular for distances equal to or less than 2mm—Test results of research on influencing parameters
GB/Z 43963-2024
Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC
GB/T 775.2-2003
Test method for insulators--Part2: Electrical test methods
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.