GB/Z 16935.2-2013
ActiveInsulation coordination for equipment within low-voltage systems―Part 2-1: Application guide-Explanation of the application of the IEC 60664 series, dimensioning example and dielectric testing
低压系统内设备的绝缘配合 第2-1部分：应用指南 GB/T 16935系列应用解释,定尺寸示例及介电试验
Application Summary AI generated
This standard provides a detailed application guide for implementing the IEC 60664 series on insulation coordination within low-voltage systems (up to 1,000 V AC or 1,500 V DC). It is specifically used by electrical engineers and designers to correctly dimension clearances, creepage distances, and solid insulation, and to conduct dielectric testing for equipment such as switchgear, control panels, and industrial electronics. The standard ensures reliable performance and safety by offering practical examples and explanations for avoiding insulation breakdown in diverse environmental conditions.
Related Standards
GB/T 19443-2004
Insulators for overhead lines with a nominal voltage above 1000V--Ceramic or glass insulator units for d.c. systems--Difinitions，test methods and acceptance criteria
GB/T 4585-2004
Artificial pollution tests on high-voltage insulators to be used on a.c. systems
GB/Z 23756.1-2009
Evaluation of electrical endurance of electrical insulation systems - Part 1: General considerations and evaluation procedures based on normal distributions
GB/Z 16935.6-2016
Insulation coordination for equipment within low-voltage systems—Part 2-2: Interface considerations—Application guide
GB/Z 37754-2019
Guidance on clearances and creepage distances in particular for distances equal to or less than 2mm—Test results of research on influencing parameters
GB/Z 43963-2024
Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC
GB/T 775.2-2003
Test method for insulators--Part2: Electrical test methods
GB/T 1001.1-2003
Insulators for overhead lines with a nominal voltage above 1000V--Part 1: Ceramic or glass insulator units for a.c.systems--Definitions，test methods and acceptance criteria
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.