GB/T 20111.5-2020
ActiveElectrical insulation systems—Procedures for thermal evaluation—Part 5: Applications with a designed life of 5000h or less
电气绝缘系统 热评定规程 第5部分:设计寿命5000h及以下的应用
Application Summary AI generated
This standard specifies thermal evaluation procedures for electrical insulation systems intended for applications with a design life of 5000 hours or less. It is applied in industries such as small motors, transformers, and appliances where equipment operates intermittently or for short durations, ensuring insulation reliability under accelerated thermal aging conditions. The standard provides testing protocols to validate insulation performance in products like power tools, automotive starters, or household appliances with limited operational lifespans.
Related Standards
GB/T 19443-2004
Insulators for overhead lines with a nominal voltage above 1000V--Ceramic or glass insulator units for d.c. systems--Difinitions，test methods and acceptance criteria
GB/T 4585-2004
Artificial pollution tests on high-voltage insulators to be used on a.c. systems
GB/Z 23756.1-2009
Evaluation of electrical endurance of electrical insulation systems - Part 1: General considerations and evaluation procedures based on normal distributions
GB/Z 16935.2-2013
Insulation coordination for equipment within low-voltage systems―Part 2-1: Application guide-Explanation of the application of the IEC 60664 series, dimensioning example and dielectric testing
GB/Z 16935.6-2016
Insulation coordination for equipment within low-voltage systems—Part 2-2: Interface considerations—Application guide
GB/Z 37754-2019
Guidance on clearances and creepage distances in particular for distances equal to or less than 2mm—Test results of research on influencing parameters
GB/Z 43963-2024
Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC
GB/T 775.2-2003
Test method for insulators--Part2: Electrical test methods
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.