GB/T 19520.13-2009

Active

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-102: Injector/extractor handle

电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-102部分：插拔器手柄

Standard Type
GBT
ICS
31.240
CCS
K05
Status
Active
Issue Date
2009-03-19
Implementation
2009-12-01
Centralized Committee
国家标准委
Issuing Authority
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies the dimensions and interface requirements for injector/extractor handles used with 482.6 mm (19-inch) series mechanical structures in electronic equipment. It is applied in the design and manufacturing of rack-mounted electronic systems, such as servers, telecommunications hardware, and industrial control cabinets, to ensure handles fit standardized chassis and facilitate safe insertion and removal of plug-in units. The standard is primarily used by engineers and procurement professionals for component compatibility and quality assurance in electronics assembly and testing contexts.

Related Standards

GB/T 19247.1-2003 Printed board assemblies--Part 1: Generic specification--Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies GB/T 19247.2-2003 Printed board assemblies--Part 2: Sectional specification--Requirements for surface mount solderedassemblies GB/T 3047.5-2003 Series of basic dimensions of cabiners for vertical increment of 20mm GB/T 19290.2-2003 Modular order for the development of mechanical structures for electronic equipment practices--Part 2: Sectional specification--Interface co-ordination dimensions for the 25mm equipment practice GB/T 19290.1-2003 Modular order for the development of mechanical structures for electronic equipment practices--Part 1: Generic standard GB/T 3047.3-2003 Series of basic dimensions of subracks and plug-in units for vertical increment of 20mm GB/T 19247.3-2003 Printed board assemblies--Part 3:Sectional specification--Requirements for through-hole mount soldered assemblies GB/T 19405.2-2003 Surface mounting technology--Part 2:Transportation and storage conditions of surface mounting devices(SMD)--Application guide
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.