FZ/T 93035-2011
ActiveCotton flyer roving frame
棉纺托锭粗纱机
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 参数 → 4 要求 → 5 试验方法 → 6 检验规则 → 7 标志、包装、运输、贮存 → 附录A Foreword → 1 Scope → 2 Normative References → 3 Parameters → 4 Requirements → 5 Test Methods → 6 Inspection Rules → 7 Marking, Packaging, Transport, and Storage → Annex A
Scope
This standard specifies the parameters, requirements, test methods, inspection rules, marking, packaging, transport, and storage of cotton flyer roving frames. This standard applies to cotton flyer roving frames for pure spinning and blending of chemical fibers with cotton and fiber lengths below 65 mm.
本标准规定了棉纺托锭粗纱机的参数、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于棉及纤维长度在65 mm以下的化纤纯纺、混纺的棉纺托锭粗纱机。
Normative References
Keywords
Application Summary AI generated
Cotton spinning enterprises use this standard to design, manufacture, and inspect flyer roving frames. It ensures the quality, safety, and reliability of the roving frame during the spinning process, serving as a key technical reference for the textile industry.
棉纺企业使用该标准来设计、制造和检验托锭粗纱机。它确保了粗纱机在纺纱过程中的质量、安全性和可靠性，是纺织行业的重要技术依据。
AI Summary AI generated
This standard specifies parameters, requirements, test methods, inspection rules, marking, packaging, transport, and storage for cotton flyer roving frames. It applies to pure and blended spinning of cotton and chemical fibers up to 65 mm. Key technical content includes requirements for components (rollers, bearings, spindles), drive system, drafting system, winding system, electrical safety, noise limit (≤85 dB(A)), power consumption, roving quality (evenness, breakage rate), and test methods including no-load and load tests.
本标准规定了棉纺托锭粗纱机的参数、要求、试验方法、检验规则、标志、包装、运输和贮存。适用于棉及65mm以下化纤的纯纺和混纺。主要技术内容包括专件要求（如罗拉、轴承、锭子）、传动系统、牵伸系统、卷绕系统、电气安全、噪声限值（≤85dB(A)）、功率消耗、粗纱质量（条干均匀度、断头率）等。试验方法包括空车运转和工作负荷试验。
Key Sentences extracted from text
本标准规定了棉纺托锭粗纱机的参数、要求、试验方法、检验规则、标志、包装、运输和贮存。
本标准适用于棉及纤维长度在65 mm以下的化纤纯纺、混纺的棉纺托锭粗纱机。
机器运转平稳，无异常振动和声响。
各齿轮轴承、主轴轴承和锥轮轴承温升≤20℃。
锭翼转速900 r/min时，全机噪声发射声压级≤85 dB(A)。
This standard specifies the parameters, requirements, test methods, inspection rules, marking, packaging, transport, and storage of cotton flyer roving frames.
This standard applies to cotton flyer roving frames for pure spinning and blending of chemical fibers with cotton and fiber lengths below 65 mm.
The machine operates smoothly, without abnormal vibration or noise.
The temperature rise of each gear bearing, main shaft bearing, and cone wheel bearing shall be ≤20°C.
When the flyer speed is 900 r/min, the sound pressure level of the whole machine noise emission shall be ≤85 dB(A).
Standard Timeline
Changes from replaced version:
- 提高了成品质量要求
- 增加了电气设备安全性能要求和试验方法
- Improved finished product quality requirements
- Added safety performance requirements and test methods for electrical equipment