QB/T 2485-2008
AbolishedToilet soap
香皂
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 产品分类、标记 → 4 要求 Foreword → 1 Scope → 2 Normative References → 3 Product Classification and Marking → 4 Requirements
Scope
This standard specifies the product classification, requirements, test methods, inspection rules, and marking, packaging, transportation, storage, and shelf life of toilet soap. This standard applies to sodium fatty acid soaps produced by milling and cooling molding processes, as well as bar soaps, medicated soaps, crystal soaps, etc., made mainly from sodium fatty acid with the addition of other surfactants, functional additives, and auxiliaries.
本标准规定了香皂的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存、保质期。本标准适用于碾制工艺、冷却成型工艺生产的脂肪酸钠皂，及以脂肪酸钠为主，添加其他表面活性剂、功能性添加剂、助剂制成的块状香皂、药皂、水晶皂等。
Normative References
Keywords
Application Summary AI generated
Toilet soap manufacturers and quality inspection agencies use this standard to regulate product classification, technical requirements, and testing methods. It helps ensure that commercial toilet soaps meet uniform criteria in composition, sensory quality, and safety, protecting consumer interests. The standard also provides guidance on product labeling and packaging, promoting market order.
香皂生产企业和质量监督检验机构使用本标准来规范香皂产品的分类、技术要求和检测方法。它帮助确保市售香皂在成分、感官和安全性方面符合统一标准，保护消费者权益。该标准还为企业提供了产品标记和包装的指导，促进市场秩序。
AI Summary AI generated
This standard specifies product classification, requirements, test methods, inspection rules, and marking/packaging for toilet soap. Soaps are classified into soap-based (Type I) and composite (Type II) types, with transparent type defined. Revisions include adjustments to total free alkali, chloride, moisture and volatiles indicators, and new requirements for total phosphorus pentoxide and transparency. It applies to sodium fatty acid soaps produced by milling or cooling molding and their composite products.
本标准规定了香皂的产品分类、要求、试验方法、检验规则及标志包装等。香皂按成分分为皂基型（I型）和复合型（II型），并定义了透明型产品。标准修订了总游离碱、氯化物、水分和挥发物等指标，新增了总五氧化二磷和透明度要求。适用于碾制或冷却成型工艺生产的脂肪酸钠皂及其复合产品。
Key Sentences extracted from text
本标准规定了香皂的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存、保质期。
本标准适用于碾制工艺、冷却成型工艺生产的脂肪酸钠皂，及以脂肪酸钠为主，添加其他表面活性剂、功能性添加剂、助剂制成的块状香皂、药皂、水晶皂等。
采用本标准的产品，按成分分为皂基型和复合型二类：皂基型（以I型表示）：仅含脂肪酸钠、助剂的产品。
在销售外包装上，如果在产品名称、使用说明及其他内容中，凡对皂体描述有诸如“透明”、“半透明”、“水晶”等含意文字的产品，均视为透明型产品。
包装整洁，端正，不歪斜；包装物商标、图案、字迹应清楚。
This standard specifies the product classification, requirements, test methods, inspection rules, and marking, packaging, transportation, storage, and shelf life of toilet soap.
This standard applies to sodium fatty acid soaps produced by milling and cooling molding processes, as well as bar soaps, medicated soaps, crystal soaps, etc., made mainly from sodium fatty acid with the addition of other surfactants, functional additives, and auxiliaries.
Products adopting this standard are classified into soap-based type and composite type according to composition: soap-based type (indicated as Type I): products containing only sodium fatty acid and auxiliaries.
On the sales packaging, if the product name, instructions for use, or other content describes the soap body with words such as 'transparent', 'semi-transparent', 'crystal', etc., the product is considered a transparent type product.
The packaging shall be clean, upright, and not skewed; the trademark, pattern, and lettering on the packaging shall be clear.
Standard Timeline
Changes from replaced version:
- 扩大了名称涵盖的范围
- 增加了产品标记内容
- 取消I型产品%总游离碱(以NaOH计)、乙醇不溶物、氯化物(以NaCl计)之和指标，单独设立总游离碱、氯化物指标
- 取消了I型产品水不溶物指标
- 增加了对II型产品水分和挥发物的要求，修订了水分和挥发物报告结果的折算式
- 增加了总五氧化二磷指标
- 增加了透明型香皂的透明度指标及测定方法
- 修订了试样的制备方法
- 增加了试验方法中相关内容的要
- 修订了检验规则
- 修订了标志、包装的要求
- Expanded the scope of the name coverage
- Added product marking content
- Canceled the combined indicator of total free alkali (as NaOH), ethanol insolubles, and chloride (as NaCl) for Type I products, and established separate indicators for total free alkali and chloride
- Canceled the water insolubles indicator for Type I products
- Added requirements for moisture and volatiles for Type II products, and revised the conversion formula for reporting moisture and volatiles results
- Added the total phosphorus pentoxide indicator
- Added the transparency indicator and determination method for transparent type soap
- Revised the sample preparation method
- Added requirements for relevant content in test methods
- Revised the inspection rules
- Revised the requirements for marking and packaging