QB/T 2477-2007

Active

Dicalcium phosphate dihydrate for toothpaste

牙膏用二水磷酸氢钙

Standard Type
QB
ICS
71.100.40
CCS
Y43
Status
Active
Issue Date
2007-12-03
Implementation
2008-06-01
Centralized Committee
全国牙膏蜡制品标准化中心 / National Standardization Center for Toothpaste and Wax Products
Issuing Authority
中华人民共和国国家发展和改革委员会 / National Development and Reform Commission of the People's Republic of China

Catalogue

前言 → 1 范围 → 2 规范性引用文件 → 3 要求 Foreword → 1 Scope → 2 Normative References → 3 Requirements

Scope

This standard specifies the requirements, test methods, inspection rules, and marking, packaging, transportation, storage, and shelf life of dicalcium phosphate dihydrate for toothpaste. This standard applies to dicalcium phosphate dihydrate for toothpaste produced by neutralization and double decomposition methods. This product is used as a toothpaste abrasive.

本标准规定了牙膏用二水磷酸氢钙的要求, 试验方法, 检验规则和标志, 包装, 运输, 贮存, 保质期。本标准适用于中和法及复分解法生产的牙膏用二水磷酸氢钙。该产品用作牙膏摩擦剂。

Normative References

GB/T 191 GB/T 601 GB/T 602 GB/T 603-2002 GB/T 610.1 GB/T 6003.1-1997 GB/T 6678-2003 GB/T 6682 GB/T 8170 GB/T 9086 GB/T 9087-1988 GB/T 9724-2007 GB/T 9729 GB/T 9735 GB/T 9739 JJF 1070-2005

Keywords

牙膏 (toothpaste) 二水磷酸氢钙 (dicalcium phosphate dihydrate) 摩擦剂 (abrasive) 感官指标 (sensory index) 理化指标 (physicochemical index) 微生物指标 (microbiological index) 净含量 (net content)

Application Summary AI generated

Toothpaste manufacturers and raw material suppliers use this standard to ensure the quality of dicalcium phosphate dihydrate meets requirements. It specifies sensory, physicochemical, microbiological, and net content indices, helping to control the safety and effectiveness of the toothpaste abrasive. This standard is crucial for ensuring the stability of toothpaste products and consumer health.

牙膏生产企业和原料供应商使用该标准来确保二水磷酸氢钙的质量符合要求。该标准规定了产品的感官、理化、微生物和净含量指标,帮助控制牙膏摩擦剂的安全性和有效性。它对于保障牙膏产品的稳定性和消费者健康至关重要。

AI Summary AI generated

This standard specifies technical requirements, test methods, inspection rules, packaging, and transportation for dicalcium phosphate dihydrate used in toothpaste. It applies to products made by neutralization and double decomposition methods, serving as a toothpaste abrasive. The revision updates indices for pH, fineness, apparent density, fluoride stability, calcium chloride, phosphorus pentoxide, loss on ignition, heavy metals, iron, chlorides, sulfates, and arsenic, and adds requirements for barium, total microbial count, and net content. It references multiple national standards and Ministry of Health regulations to ensure product quality and safety.

本标准规定了牙膏用二水磷酸氢钙的技术要求、试验方法、检验规则及包装运输等。适用于中和法和复分解法生产的该产品,用作牙膏摩擦剂。标准修订了pH、细度、表观密度、氟离子稳定性、氯化钙、五氧化二磷、灼烧失量、重金属、铁、氯化物、硫酸盐、砷等指标,并增加了钡、微生物总数和净含量要求。引用多项国家标准和卫生部规范,确保产品质量和安全性。

Key Sentences extracted from text

1.

本标准规定了牙膏用二水磷酸氢钙的要求, 试验方法, 检验规则和标志, 包装, 运输, 贮存, 保质期。

2.

本标准适用于中和法及复分解法生产的牙膏用二水磷酸氢钙。

3.

该产品用作牙膏摩擦剂。

4.

感官, 理化指标应符合表1的规定。

5.

杂质, 微生物指标应符合表2的规定。

7.

This standard specifies the requirements, test methods, inspection rules, and marking, packaging, transportation, storage, and shelf life of dicalcium phosphate dihydrate for toothpaste.

8.

This standard applies to dicalcium phosphate dihydrate for toothpaste produced by neutralization and double decomposition methods.

9.

This product is used as a toothpaste abrasive.

10.

Sensory and physicochemical indices shall comply with the provisions of Table 1.

11.

Impurity and microbiological indices shall comply with the provisions of Table 2.

Standard Timeline

replaces QB/T 2477-2000 (牙膏用二水磷酸氢钙)

Changes from replaced version:

  • 修订了pH指标, 不分产品类型统一规定为6.9~8.1
  • 修订了细度指标
  • 增加了表观密度指标及试验方法
  • 修订了氟离子稳定性快速试验方法
  • 修订了氯化钙指标及试验方法
  • 修订了五氧化二磷含量指标
  • 修订了灼烧失量指标
  • 修订了重金属含量指标及试验方法
  • 修订了铁含量试验方法
  • 增加了钡指标及试验方法
  • 修订了氯化物含量指标
  • 修订了硫酸盐含量指标
  • 修订了砷含量试验方法
  • 增加了细菌与酵母菌总数指标及试验方法
  • 增加了中华人民共和国卫生部《化妆品卫生规范》的引用
  • 增加了净含量指标, 并按照中华人民共和国国家质量监督检验检疫总局令[2005]第75号《定量包装商品计量监督管理办法》执行
  • Revised pH index, uniformly specified as 6.9~8.1 regardless of product type
  • Revised fineness index
  • Added apparent density index and test method
  • Revised rapid test method for fluoride ion stability
  • Revised calcium chloride index and test method
  • Revised phosphorus pentoxide content index
  • Revised loss on ignition index
  • Revised heavy metal content index and test method
  • Revised iron content test method
  • Added barium index and test method
  • Revised chloride content index
  • Revised sulfate content index
  • Revised arsenic content test method
  • Added total bacterial and yeast count index and test method
  • Added reference to the Ministry of Health of the People's Republic of China 'Hygienic Standard for Cosmetics'
  • Added net content index, implemented in accordance with Order No. 75 [2005] of the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China 'Administrative Measures for Metrological Supervision of Prepackaged Goods'

Related Standards

Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.