JB/T 4168-2011
ActiveModular machine tools—Model numbering method
组合机床 型号编制方法
Catalogue
前言 → 1 范围 → 2 简要说明 → 3 组合机床及其自动线型号的表示 → 3.1 表示方法 → 3.2 设计单位代号 → 3.3 分类代号 → 3.4 设计顺序号 → 3.5 重大改进顺序号 → 4 表示方法示例 → 5 分类原则 → 附录A（规范性附录）组合机床分类原则 Foreword → 1 Scope → 2 Brief Description → 3 Representation of Modular Machine Tools and Their Transfer Lines Model → 3.1 Representation Method → 3.2 Design Unit Code → 3.3 Classification Code → 3.4 Design Serial Number → 3.5 Major Improvement Serial Number → 4 Example of Representation Method → 5 Classification Principle → Annex A (Normative) Classification Principle of Modular Machine Tools
Scope
This standard specifies the model representation method for modular machine tools and their transfer lines. This standard applies to modular machine tools and their transfer lines. This standard does not apply to special-purpose machine tools and their transfer lines.
本标准规定了组合机床及其自动线的型号表示方法。本标准适用于组合机床及其自动线。本标准不适用于专用机床及其自动线。
Keywords
Application Summary AI generated
Machine tool manufacturers and design units use this standard to assign model numbers to modular machine tools and their transfer lines. The unified numbering method clearly identifies the machine type, design unit, and improvement sequence, facilitating production management and user selection. This standard helps standardize product identification within the industry and improves the efficiency of information exchange.
机床制造企业和设计单位使用本标准来为组合机床及其自动线编制型号。通过统一的型号编制方法，可以清晰标识机床的类型、设计单位和改进顺序，便于生产管理和用户选型。该标准有助于规范行业内的产品标识，提高信息交流效率。
AI Summary AI generated
This standard specifies the model numbering method for modular machine tools and their transfer lines, including the representation method, design unit code, classification code, design serial number, and major improvement serial number. The model is composed of Chinese phonetic alphabet letters and Arabic numerals, with classification codes divided by machine tool type (large, small, micro, CNC, etc.). The standard applies to modular machine tools and their transfer lines, but not to special-purpose machine tools. Annex A provides the classification principle for modular machine tools.
本标准规定了组合机床及其自动线的型号编制方法，包括型号的表示方法、设计单位代号、分类代号、设计顺序号和重大改进顺序号等要素。型号由汉语拼音字母和阿拉伯数字组成，分类代号按机床类型（大型、小型、微型、数控等）划分。标准适用于组合机床及其自动线，不适用于专用机床。附录A给出了组合机床的分类原则。
Key Sentences extracted from text
本标准规定了组合机床及其自动线的型号表示方法。
组合机床及其自动线的型号是产品的代号，由汉语拼音字母及阿拉伯数字组成，型号中有固定含义的汉语拼音字母按其相对应的汉字字意读音。
分类代号由汉语拼音字母组成，位于设计单位代号之后，并用“—”分开，读作“之”。
设计顺序号以阿拉伯数字表示，位于分类代号之后，设计顺序号机床由“001”起始，自动线由“01”起始，顺序号超过规定位数时，按顺序依次进位。
当机床的结构、性能有重大改进和提高，并需按新产品重新设计、试制时，在机床型号之后按A、B、C、…等汉语拼音字母的顺序选用（但“I、O”两个字母不得选用），加入型号的尾部以区别于原机床型号。
This standard specifies the model representation method for modular machine tools and their transfer lines.
The model of modular machine tools and their transfer lines is the product code, composed of Chinese phonetic alphabet letters and Arabic numerals; Chinese phonetic alphabet letters with fixed meanings in the model are pronounced according to the meaning of the corresponding Chinese characters.
The classification code consists of Chinese phonetic alphabet letters, located after the design unit code and separated by a dash '—', pronounced as 'zhi'.
The design serial number is expressed in Arabic numerals, located after the classification code; for machine tools the design serial number starts from '001', for transfer lines it starts from '01', and when the serial number exceeds the specified number of digits, it is carried forward in order.
When the structure or performance of the machine tool has undergone major improvement and enhancement, and it needs to be redesigned and trial-manufactured as a new product, the letters A, B, C, ... in the Chinese phonetic alphabet (but the letters 'I' and 'O' shall not be used) are selected in order after the machine tool model and added to the tail of the model to distinguish it from the original machine tool model.
Standard Timeline
Changes from replaced version:
- 对原标准“前言”中的提出和归口单位进行了修改。
- The proposing and centralized management units in the foreword of the original standard have been revised.