GB/T 39655.2-2020
ActiveShipbuilding—Ship screw propellers—Manufacturing tolerances—Part 2:Propellers of diameter between 0.8m and 2.5m inclusive
造船 船用螺旋桨 制造公差 第2部分：直径在0.8m至2.5m的螺旋桨
Application Summary AI generated
This standard specifies the permissible manufacturing tolerances for ship screw propellers with diameters between 0.8 meters and 2.5 meters. It is applied in the shipbuilding industry during the production and quality inspection of medium-sized propellers, ensuring geometric accuracy and performance consistency. The standard is used by manufacturers and classification societies to verify that propellers meet design specifications for installation on vessels such as fishing boats, tugs, and small cargo ships.
Related Standards
JB/T 51094-1999
Marine Gearbox Product Quality Grading (Internal Use)
GB/T 13029.1-2003
Electrical installations in ships--Choice and installation of cables for low-voltage power systems
GB/T 19283-2003
Dimensions series of container ship passing the lock of three gorges dam
GB/T 12045-2003
Specification of marine explosion-proof light
GB/T 6918-2005
Hand windlass and anchor capstan
GB/T 14650-2005
General specification for marine auxiliary boiler
GB/T 19700-2005
Test method of thermal property for marine heat exchanger
GB/T 14649-2005
Test method for marine auxiliary boiler property
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.