GB/T 33208-2025
ActiveEquipment structure health monitoring—Practice for the turbine blades on-line vibration monitoring based on tip-timing theory
设备结构健康监测 基于叶尖定时原理的透平叶片振动在线监测方法
Application Summary AI generated
This standard specifies the methodology for online vibration monitoring of turbine blades using tip-timing theory, focusing on real-time blade health assessment without contact sensors. It is applied in the operation and maintenance of rotating machinery such as steam turbines, gas turbines, and compressors in power generation and industrial sectors. The standard guides engineers in implementing vibration monitoring systems to detect blade damage, fatigue, or resonance, ensuring structural integrity and preventing catastrophic failures during continuous operation.
Related Standards
GB/T 20485.12-2008
Method for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
GB/T 13823.1-2005
Methods for the calibration of vibration and shock transducers part 1:Basic concepts
GB/T 14412-2005
Mechanical vibration and shock-Mechanical mounting of accelerometers
GB/T 6075.6-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 6:Reciprocating machines with power ratings above 100kW
GB/T 6075.5-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 5:Machine sets in hydraulic power generating and pumping plants
GB/T 6075.2-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 2:Large land-based steam turbine generator setsin excess of 50MW
GB/T 6075.4-2001
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives
GB/T 6075.3-2001
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.