GB/T 6075.4-2001
AbolishedMechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives
在非旋转部件上测量和评价机器的机械振动 第4部分:不包括航空器类的燃气轮机驱动装置
Application Summary AI generated
This standard specifies guidelines for evaluating the vibration of gas turbine driven sets (excluding aircraft derivatives) by measuring on non-rotating parts such as bearing housings. It is applied in industrial contexts for acceptance testing, condition monitoring, and operational assessment of gas turbine installations used in power generation, mechanical drive applications, and marine propulsion. The standard provides vibration severity criteria to ensure reliable operation and prevent mechanical damage in these heavy-duty rotating machinery systems.
Related Standards
GB/T 20485.12-2008
Method for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
GB/T 14412-2005
Mechanical vibration and shock-Mechanical mounting of accelerometers
GB/T 13823.1-2005
Methods for the calibration of vibration and shock transducers part 1:Basic concepts
GB/T 6075.6-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 6:Reciprocating machines with power ratings above 100kW
GB/T 6075.5-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 5:Machine sets in hydraulic power generating and pumping plants
GB/T 6075.2-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 2:Large land-based steam turbine generator setsin excess of 50MW
GB/T 6075.3-2001
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
GB/T 18328-2001
Guidance for selection of vibration generator system
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.