GB/T 6075.2-2002
AbolishedMechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 2:Large land-based steam turbine generator setsin excess of 50MW
在非旋转部件上测量和评价机器的机械振动 第2部分:50MW以上陆地安装的大型汽轮发电机组
Application Summary AI generated
This standard specifies guidelines for evaluating the mechanical vibration of large land-based steam turbine generator sets with power ratings exceeding 50MW, based on measurements taken on non-rotating parts such as bearing housings. It is applied in the power generation industry for acceptance testing, commissioning, and routine condition monitoring of these large turbine-generator units to ensure safe and reliable operation. The standard provides vibration severity criteria to assess machine condition and prevent damage from excessive vibration.
Related Standards
GB/T 20485.12-2008
Method for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
GB/T 13823.1-2005
Methods for the calibration of vibration and shock transducers part 1:Basic concepts
GB/T 14412-2005
Mechanical vibration and shock-Mechanical mounting of accelerometers
GB/T 6075.6-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 6:Reciprocating machines with power ratings above 100kW
GB/T 6075.5-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 5:Machine sets in hydraulic power generating and pumping plants
GB/T 6075.4-2001
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives
GB/T 6075.3-2001
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
GB/T 18328-2001
Guidance for selection of vibration generator system
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.