GB/T 32872-2016
ActiveScreening specifications for illumination LEDs in space sciences
空间科学照明用LED筛选规范
Application Summary AI generated
This standard specifies the screening procedures, test methods, and acceptance criteria for light-emitting diodes (LEDs) used in space science illumination applications. It is applied during the procurement and qualification of LED components for spacecraft, satellites, and scientific instruments operating in the vacuum, radiation, and thermal cycling conditions of outer space. The standard ensures that selected LEDs meet the reliability and performance requirements for critical space missions.
Related Standards
GB/T 8446.1-2004
Heat sink for power semiconductor device--Part 1:Casting kind series
GB/T 8446.3-2004
Heat sink for power semiconductor device--Part 3:Insulators and fasteners
GB/T 8446.2-2004
Heat sink for power semiconductor device--Part 2:Measuring method of thermal resistance and inputfluid-output fluid pressure difference
GB/T 13150-2005
Semiconductor devices Discret devices Blank detail specification for bidirectional triode thyristors(triacs),ambient and case-rated,for currents greater than 100A
GB/T 13151-2005
Semiconductor devices Discrete devices Part 6:Thyristors Section Three-Blank detail specification for reverse blocking triode thyristors,ambient and case-rated,for currents greater than 100A
GB/Z 107-2025
Semiconductor devices—Scan based ageing level estimation for semiconductor devices
GB/Z 102.17-2026
Semiconductor devices—Discrete devices—Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
GB/T 6589-2002
Semiconductordevices--Discrete devices--Part 3-2:Signal (including switching) and regulator diodes--Blank detail specification for voltage-regulator diodes and voltage-reference diodes (excluding temperature-compensated precision reference diodes)
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.