GB/T 311.6-2005
ActiveVoltage measurement by means of standard air gaps
高电压测量标准空气间隙
Application Summary AI generated
This standard specifies the use of standard air gaps for measuring high voltage, providing a calibration method for peak voltage values in high-voltage testing. It is applied in electrical engineering laboratories and field testing contexts to verify the accuracy of voltage measurement systems, particularly for impulse and alternating voltages. The standard is relevant for equipment such as transformers, insulators, and switchgear undergoing dielectric tests.
Related Standards
GB/T 7354-2003
Partial discharge measurements
GB/T 18134.1-2000
High-voltage testing techniques with very fast impulses--Part 1:Measuring systems for very fast front overvoltages generated in gas-insulated substations
GB/T 16511-1996
Electrical and electronic measuring equipment--Documentation
GB/T 14537-1993
Shock and bump tests on measuringrelays and protection equipment
GB/T 7265.2-1987
Test method for the complex permittivity of solid dielectric materials at microwave frequencies--Open cavity method
GB/T 7265.1-1987
Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB/T 3929-1983
Standard cells
GB/T 3925-1983
Acceptance inspection of class 2 alternatingcurrent watthour meters
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.