GB/T 30173.2-2014
ActiveMechanical vibration and shock―Resilient mounting systems―Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
机械振动与冲击 弹性安装系统 第2部分：轨道交通系统隔振应用需交换的技术信息
Application Summary AI generated
This standard specifies the technical information that must be exchanged between parties involved in the design and installation of resilient mounting systems for railway vibration isolation. It is applied in the context of rail transit systems, including subways, light rail, and high-speed railways, to ensure effective vibration control in structures and the surrounding environment. The standard facilitates clear communication of parameters such as load, stiffness, and damping requirements between engineers, manufacturers, and contractors.
Related Standards
GB/T 20485.12-2008
Method for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
GB/T 14412-2005
Mechanical vibration and shock-Mechanical mounting of accelerometers
GB/T 13823.1-2005
Methods for the calibration of vibration and shock transducers part 1:Basic concepts
GB/T 6075.6-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 6:Reciprocating machines with power ratings above 100kW
GB/T 6075.5-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 5:Machine sets in hydraulic power generating and pumping plants
GB/T 6075.2-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 2:Large land-based steam turbine generator setsin excess of 50MW
GB/T 6075.4-2001
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives
GB/T 6075.3-2001
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.