GB/T 30173.1-2013
ActiveMechanical vibration and shock—Resilient mounting systems—Part 1: Technical information to be exchanged for the application of isolation systems
机械振动与冲击 弹性安装系统 第1部分：用于交换的隔振系统的技术信息
Application Summary AI generated
This standard specifies the technical information that must be exchanged between suppliers and users when designing or applying resilient mounting systems for vibration isolation. It is applied in industrial contexts where machinery generates mechanical vibration or shock, such as in manufacturing equipment, engines, or heavy machinery, to ensure proper selection and installation of isolation systems. The standard facilitates accurate communication of parameters like load capacity, stiffness, and damping characteristics to achieve effective vibration control.
Related Standards
GB/T 20485.12-2008
Method for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
GB/T 14412-2005
Mechanical vibration and shock-Mechanical mounting of accelerometers
GB/T 13823.1-2005
Methods for the calibration of vibration and shock transducers part 1:Basic concepts
GB/T 6075.6-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 6:Reciprocating machines with power ratings above 100kW
GB/T 6075.5-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 5:Machine sets in hydraulic power generating and pumping plants
GB/T 6075.2-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 2:Large land-based steam turbine generator setsin excess of 50MW
GB/T 6075.4-2001
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives
GB/T 6075.3-2001
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.