GB/T 28784.3-2012
ActiveMechanical vibration - Measurement of vibration on ships - Part 3: Pre-installation vibration measurement of shipboard equipment
机械振动 船舶振动测量 第3部分：船上设备安装前的振动测量
Application Summary AI generated
This standard specifies the procedures for measuring vibration levels of shipboard equipment, such as pumps, engines, and compressors, before they are installed on a vessel. It is applied in shipbuilding and marine engineering contexts to establish baseline vibration data, ensuring equipment meets operational requirements and can be properly isolated from the ship's structure. The standard helps prevent resonance issues and structural fatigue by providing reference measurements for vibration acceptance criteria during equipment procurement and installation planning.
Related Standards
GB/T 20485.12-2008
Method for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
GB/T 13823.1-2005
Methods for the calibration of vibration and shock transducers part 1:Basic concepts
GB/T 14412-2005
Mechanical vibration and shock-Mechanical mounting of accelerometers
GB/T 6075.6-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 6:Reciprocating machines with power ratings above 100kW
GB/T 6075.5-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 5:Machine sets in hydraulic power generating and pumping plants
GB/T 6075.2-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 2:Large land-based steam turbine generator setsin excess of 50MW
GB/T 6075.4-2001
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives
GB/T 6075.3-2001
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.