GB/T 25742.4-2022

Active

Condition monitoring and diagnostics of machine systems—Data processing ,communication and presentation—Part 4：Presentation

机器状态监测与诊断 数据处理、通信与表示 第4部分：表示

Standard Type
GBT
ICS
17.160
CCS
J04
Status
Active
Issue Date
2022-10-12
Implementation
2022-10-12
Centralized Committee
国家标准委
Issuing Authority
国家市场监督管理总局、国家标准化管理委员会

Application Summary AI generated

This standard specifies the requirements for the presentation of condition monitoring and diagnostic information for machine systems, including data visualization formats, display structures, and user interface guidelines. It is applied in industrial settings where engineers and operators need to interpret vibration, temperature, and other sensor data from rotating machinery for predictive maintenance and fault diagnosis. The standard ensures consistent and clear representation of diagnostic results across different monitoring systems and software platforms.

Related Standards

GB/T 20485.12-2008 Method for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method GB/T 14412-2005 Mechanical vibration and shock-Mechanical mounting of accelerometers GB/T 13823.1-2005 Methods for the calibration of vibration and shock transducers part 1:Basic concepts GB/T 6075.6-2002 Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 6:Reciprocating machines with power ratings above 100kW GB/T 6075.5-2002 Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 5:Machine sets in hydraulic power generating and pumping plants GB/T 6075.2-2002 Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 2:Large land-based steam turbine generator setsin excess of 50MW GB/T 6075.4-2001 Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives GB/T 6075.3-2001 Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.