GB/T 23718.4-2015
ActiveCondition monitoring and diagnostics of machines—Requirements for qualification and assessment of personnel—Part 4: Field lubricant analysis
机器状态监测与诊断 人员资格与人员评估的要求 第4部分：现场润滑剂分析
Application Summary AI generated
This standard specifies the qualification requirements and assessment criteria for personnel performing field lubricant analysis as part of machine condition monitoring and diagnostics. It is applied in industrial settings such as manufacturing plants, power generation facilities, and heavy machinery operations, where technicians must be certified to conduct on-site lubricant sampling, testing, and interpretation to detect machine wear and contamination. The standard ensures that personnel have the necessary competence to perform reliable field lubricant analysis, supporting predictive maintenance programs and reducing equipment downtime.
Related Standards
GB/T 20485.12-2008
Method for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
GB/T 14412-2005
Mechanical vibration and shock-Mechanical mounting of accelerometers
GB/T 13823.1-2005
Methods for the calibration of vibration and shock transducers part 1:Basic concepts
GB/T 6075.6-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 6:Reciprocating machines with power ratings above 100kW
GB/T 6075.5-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 5:Machine sets in hydraulic power generating and pumping plants
GB/T 6075.2-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 2:Large land-based steam turbine generator setsin excess of 50MW
GB/T 6075.4-2001
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives
GB/T 6075.3-2001
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.