GB/T 22393-2015
ActiveCondition monitoring and diagnostics of machines—General guidelines
机器状态监测与诊断 一般指南
Application Summary AI generated
This standard provides general guidelines for the procedures and methodologies used in the condition monitoring and diagnostics of machines, focusing on vibration, temperature, and other physical parameters. It is applied across industrial sectors such as manufacturing, power generation, and transportation to establish consistent practices for detecting machine faults, predicting failures, and optimizing maintenance schedules. The standard is intended for engineers and technicians involved in predictive maintenance and machine health assessment in rotating and reciprocating machinery.
Related Standards
GB/T 20485.12-2008
Method for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
GB/T 13823.1-2005
Methods for the calibration of vibration and shock transducers part 1:Basic concepts
GB/T 14412-2005
Mechanical vibration and shock-Mechanical mounting of accelerometers
GB/T 6075.6-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 6:Reciprocating machines with power ratings above 100kW
GB/T 6075.5-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 5:Machine sets in hydraulic power generating and pumping plants
GB/T 6075.2-2002
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 2:Large land-based steam turbine generator setsin excess of 50MW
GB/T 6075.4-2001
Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives
GB/T 6075.3-2001
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.