GB/T 17360-2008
AbolishedQuantitative analysis method of low content Si and Mn in steel with electron probe microanalysis
钢中低含量Si、Mn的电子探针定量分析方法
Application Summary AI generated
This standard specifies the electron probe microanalysis (EPMA) method for quantitatively determining low concentrations of silicon (Si) and manganese (Mn) in steel. It is applied in metallurgical laboratories and quality control settings for analyzing micro-areas of steel samples, particularly when precise measurement of trace alloying elements is required. The method is used to verify material composition in steel manufacturing, research, and failure analysis.
Related Standards
GB/T 20724-2006
Method of thickness measurement for thin crystal by convergent beam electron diffraction
GB/T 28727-2012
Gas analysis - Determination of sulfides - Gas chromatograph with flame photometric detector
GB/T 14666-2003
Terms for analytical chemistry
GB/T 674-2003
Chemical reagent--Copper(II)oxide powder
GB/T 1265-2003
Chemical reagent--Sodium bromide
GB/T 656-2003
Chemical reagent--Ammonium dichromate
GB/T 606-2003
Chemical reagent--General method for the determination of water--Karl Fischer method
GB/T 19502-2004
Surface chemical analysis--Glowdischarge optical emission spectrometry(GD-OES)--Introduction to use
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.