GB/T 28727-2012

Abolished

Gas analysis - Determination of sulfides - Gas chromatograph with flame photometric detector

气体分析 硫化物的测定 火焰光度气相色谱法

Standard Type
GBT
ICS
71.040.40
CCS
G 86
Status
Abolished
Issue Date
2012-09-03
Implementation
2013-02-01
Centralized Committee
全国气体标准化技术委员会气体分析分会(SAC/TC 206/SC 1) / Gas Analysis Subcommittee of National Gas Standardization Technical Committee (SAC/TC 206/SC 1)
Issuing Authority
中华人民共和国国家质量监督检验检疫总局 / General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

Catalogue

前言 → 1 范围 → 2 规范性引用文件 → 3 方法原理 → 4 试剂和材料 → 5 仪器 → 6 采样 → 7 分析步骤 → 8 结果计算 → 9 精密度 Foreword → 1 Scope → 2 Normative References → 3 Principle of Method → 4 Reagents and Materials → 5 Apparatus → 6 Sampling → 7 Analysis Procedure → 8 Calculation of Results → 9 Precision

Scope

This standard specifies the method for the determination of sulfides in gas by gas chromatography with flame photometric detector. This standard is applicable to the determination of hydrogen sulfide, carbonyl sulfide, and carbon disulfide in gas.

本标准规定了用火焰光度气相色谱法测定气体中硫化物的方法。本标准适用于气体中硫化氢、羰基硫、二硫化碳的测定。

Keywords

气体分析 (gas analysis) 硫化物 (sulfides) 测定 (determination) 火焰光度气相色谱法 (flame photometric gas chromatography) 硫化氢 (hydrogen sulfide) 羰基硫 (carbonyl sulfide) 二硫化碳 (carbon disulfide)

Application Summary AI generated

Gas analysis laboratories and industrial quality control personnel use this standard to determine sulfide content in gas samples. It provides a unified method for quantitative analysis of hydrogen sulfide, carbonyl sulfide, and carbon disulfide, ensuring accuracy and comparability of results. This standard is important for environmental monitoring, chemical production, and gas quality control.

气体分析实验室和工业质检人员使用该标准来检测气体样品中的硫化物含量。该标准为气体中硫化氢、羰基硫和二硫化碳的定量分析提供了统一的方法,确保检测结果的准确性和可比性。它对于环境监测、化工生产和气体质量控制具有重要意义。

AI Summary AI generated

GB/T 28727-2012 specifies a method for determining sulfides in gas using gas chromatography with a flame photometric detector, applicable to hydrogen sulfide, carbonyl sulfide, and carbon disulfide. The standard details the principle, reagents, apparatus, sampling, analysis procedure, and calculation of results. It was proposed by the China Petroleum and Chemical Industry Federation and is under the jurisdiction of the National Gas Standardization Technical Committee. Published in 2012 and implemented in 2013, it provides a unified technical specification for sulfide analysis in gases.

GB/T 28727-2012规定了使用火焰光度气相色谱法测定气体中硫化物的方法,适用于硫化氢、羰基硫和二硫化碳的检测。标准详细描述了方法原理、试剂、仪器、采样、分析步骤和结果计算。该标准由全国气体标准化技术委员会归口,主要起草单位包括西南化工研究设计院等。标准于2012年发布,2013年实施,为气体中硫化物分析提供了统一的技术规范。

Key Sentences extracted from text

1.

本标准规定了用火焰光度气相色谱法测定气体中硫化物的方法。

2.

本标准适用于气体中硫化氢、羰基硫、二硫化碳的测定。

3.

本标准按照 GB/T 1.1-2009 给出的规则起草。

4.

本标准由中国石油和化学工业联合会提出。

5.

本标准由全国气体标准化技术委员会气体分析分会(SAC/TC 206/SC 1)归口。

7.

This standard specifies the method for the determination of sulfides in gas by gas chromatography with flame photometric detector.

8.

This standard is applicable to the determination of hydrogen sulfide, carbonyl sulfide, and carbon disulfide in gas.

9.

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

10.

This standard was proposed by the China Petroleum and Chemical Industry Federation.

11.

This standard is under the jurisdiction of the Gas Analysis Subcommittee of National Gas Standardization Technical Committee (SAC/TC 206/SC 1).

Related Standards

Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.