GB 4793.3-2008
ActiveSafety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Particular requirements for laboratory equipment for mixing and stirring
测量、控制和实验室用电气设备的安全要求 第3部分：实验室用混合和搅拌设备的特殊要求
Application Summary AI generated
This standard specifies safety requirements for electrical mixing and stirring equipment used in laboratory environments, such as magnetic stirrers, overhead stirrers, and shakers. It is applied to ensure protection against electric shock, mechanical hazards, and fire risks during testing, research, or educational procedures in chemical, biological, and analytical laboratories. The standard is particularly relevant for manufacturers, testing organizations, and procurement professionals verifying compliance for equipment operating under normal or fault conditions.
Related Standards
GB/T 7354-2003
Partial discharge measurements
GB/T 311.6-2005
Voltage measurement by means of standard air gaps
GB/T 18134.1-2000
High-voltage testing techniques with very fast impulses--Part 1:Measuring systems for very fast front overvoltages generated in gas-insulated substations
GB/T 16511-1996
Electrical and electronic measuring equipment--Documentation
GB/T 14537-1993
Shock and bump tests on measuringrelays and protection equipment
GB/T 7265.2-1987
Test method for the complex permittivity of solid dielectric materials at microwave frequencies--Open cavity method
GB/T 7265.1-1987
Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB/T 3929-1983
Standard cells
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.