GB 4793.2-2008
ActiveSafety requirements for electrical equipment for measurement, control, and laboratory use - Part 2: Particular requirements for hand-held and hand-manipulated cruuent sensors for electrical test and measurement
测量、控制和实验室用电气设备的安全要求 第2部分：电工测量和试验用手持和手操电流传感器的特殊要求
Application Summary AI generated
This standard specifies safety requirements for hand-held and hand-manipulated current sensors, such as clamp meters and current probes, used in electrical testing and measurement. It applies to equipment designed for live electrical measurements in industrial, laboratory, and field environments, ensuring protection against electric shock, arc flash, and mechanical hazards during use. The standard is particularly relevant for test technicians, electricians, and engineers working with energized circuits up to the rated voltage limits.
Related Standards
GB/T 7354-2003
Partial discharge measurements
GB/T 311.6-2005
Voltage measurement by means of standard air gaps
GB/T 18134.1-2000
High-voltage testing techniques with very fast impulses--Part 1:Measuring systems for very fast front overvoltages generated in gas-insulated substations
GB/T 16511-1996
Electrical and electronic measuring equipment--Documentation
GB/T 14537-1993
Shock and bump tests on measuringrelays and protection equipment
GB/T 7265.2-1987
Test method for the complex permittivity of solid dielectric materials at microwave frequencies--Open cavity method
GB/T 7265.1-1987
Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB/T 3929-1983
Standard cells
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.