GB 4793.1-2007
ActiveSafety requirements for electrical equipment for measurement，control，and laboratory use - Part 1: General requirements
测量、控制和实验室用电气设备的安全要求 第1部分：通用要求
Application Summary AI generated
GB 4793.1-2007 specifies general safety requirements for electrical equipment used in measurement, control, and laboratory environments, covering aspects such as electric shock, mechanical hazards, and fire protection. It is applied to devices like test instruments, industrial process controllers, and laboratory analyzers to ensure safe operation under normal and fault conditions. This standard is primarily used by manufacturers and testing laboratories in China for product certification and compliance assessments.
Related Standards
GB/T 7354-2003
Partial discharge measurements
GB/T 311.6-2005
Voltage measurement by means of standard air gaps
GB/T 18134.1-2000
High-voltage testing techniques with very fast impulses--Part 1:Measuring systems for very fast front overvoltages generated in gas-insulated substations
GB/T 16511-1996
Electrical and electronic measuring equipment--Documentation
GB/T 14537-1993
Shock and bump tests on measuringrelays and protection equipment
GB/T 7265.2-1987
Test method for the complex permittivity of solid dielectric materials at microwave frequencies--Open cavity method
GB/T 7265.1-1987
Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
GB/T 3929-1983
Standard cells
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.