GB 24385-2009
ActiveSurface grinding machines with horizontal grinding wheel spindle and reciprocating table-Safeguarding specifications
卧轴矩合平面磨床 安全防护技术条件
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 机床的危险 → 4 安全要求和措施与验证方法 → 5 使用信息 → 6 责任 Foreword → 1 Scope → 2 Normative References → 3 Hazards of the machine tool → 4 Safety requirements and measures and verification methods → 5 Information for use → 6 Responsibility
Scope
This standard specifies the safeguarding technical requirements for surface grinding machines with horizontal grinding wheel spindle and reciprocating table.
本标准规定了卧轴矩合平面磨床的安全防护技术要求。
Keywords
Application Summary AI generated
Machine tool manufacturers, safety engineers, and inspection bodies use this standard to design and verify safeguarding measures for surface grinding machines. It ensures that risks of injury during operation, maintenance, and fault handling are minimized. This standard is critical for ensuring workplace safety in metalworking industries.
本标准由机床制造商、安全工程师和检测机构使用，用于设计和验证卧轴矩合平面磨床的安全防护措施。它确保机床在操作、维护和故障处理过程中减少人员伤害风险，是保障生产安全的重要技术依据。
AI Summary AI generated
GB 24385-2009 specifies safeguarding technical requirements for surface grinding machines with horizontal grinding wheel spindle and reciprocating table. It covers hazard identification, safety requirements, verification methods, and information for use. The standard was proposed by the China Machinery Industry Federation, drafted by Hangzhou Surface Grinding Machine Research Institute, and issued in 2009 with implementation in 2010. Some clauses are recommended while others are mandatory, aiming to ensure operator safety.
GB 24385-2009 规定了卧轴矩合平面磨床的安全防护技术条件，涵盖机床危险识别、安全要求、措施验证及使用信息。标准由全国金属切削机床标准化技术委员会归口，杭州平面磨床研究所起草，于2009年发布，2010年实施。其中部分条款为推荐性，其余为强制性，旨在保障操作人员安全。
Key Sentences extracted from text
本标准的第3章4.3.6,4.5.1中[4.7,4.9.1,4.9.4,4.10(4.10.3.2除外),4。154.16,4.17.1 4.17.2为推荐性的,其余为强制性的
本标堆由中国机械工业联合会提出.
本标推由全国金属切削机床标璀化技术委员会(SAC/TC 22)*廿。
本标堆起草单位 :杭州平面磨床研究所。
本标淮为首欢发布。
Clause 3, 4.3.6, 4.5.1, [4.7, 4.9.1, 4.9.4, 4.10 (except 4.10.3.2), 4.15, 4.16, 4.17.1, 4.17.2 are recommended; the rest are mandatory.
This standard is proposed by the China Machinery Industry Federation.
This standard is under the jurisdiction of the National Technical Committee for Standardization of Metal-Cutting Machine Tools (SAC/TC 22).
This standard is drafted by Hangzhou Surface Grinding Machine Research Institute.
This standard is published for the first time.