GB/T 8243.5-2018
ActiveMethods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability
内燃机全流式机油滤清器试验方法 第5部分：冷起动模拟和液压脉冲耐久试验
Application Summary AI generated
This standard specifies the test methods for evaluating the cold start simulation and hydraulic pulse durability of full-flow lubricating oil filters used in internal combustion engines. It is applied in the automotive and engine manufacturing industries to ensure that oil filters can withstand the mechanical stresses of engine startup in low-temperature conditions and repeated pressure surges during operation. The standard is used for product qualification, quality control, and type-approval testing of oil filters for vehicles, heavy machinery, and stationary engines.
Related Standards
JB/T 6728.2-2008
Internal combustion engines - Camshafts - Part 2: Wedge-cross rolling blanks
JB/T 51185-1999
Volute Mixed-Flow Pump - Product Quality Grading (Internal Use)
JB/T 51116-1999
Internal combustion engines - Oil pumps - Product quality grading (Internal use)
JB/T 51118-1999
Internal combustion engines - Full round main bearings - Product quality grading (Internal use)
JB/T 51114-1999
Internal combustion engines - Cooling water pumps - Product quality grading (Internal use)
JB/T 51111-1999
Internal combustion engines - Paper element oil filter assemblies - Product quality grading (Internal use)
JB/T 51119-1999
Internal combustion engines - Valve tappets - Product quality grading (Internal use)
JB/T 51117-1999
Internal Combustion Engines - Valve Seat - Product Quality Grading (Internal Use)
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.