GB/T 7165.2-2008

Active

Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 2: Specific requirements for radioactive aerosol monitors including transuranic aerosols

气态排出流(放射性)活度连续监测设备 第2部分：放射性气溶胶（包括超铀气溶胶）监测仪的特殊要求

Standard Type
GBT
ICS
13.280
CCS
F84
Status
Active
Issue Date
2008-06-19
Implementation
2009-04-01
Centralized Committee
国家标准委
Issuing Authority
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies technical requirements and test methods for monitors that continuously measure the activity concentration of radioactive aerosols, including transuranic aerosols, in gaseous effluents. It is applied in nuclear facilities, such as nuclear power plants and reprocessing plants, to ensure compliance with environmental radiation protection regulations during normal operations and potential accident conditions. The standard provides specific criteria for detector sensitivity, sampling efficiency, and alarm response for these specialized monitoring systems.

Related Standards

GB/T 13163.2-2005 Radiation protection instrumentation-Radon and radon decay product measuring instruments-Part2:Specific requirements for radon measruing instruments GB/T 17982-2000 Models and parameters forcalculating radiation doses to the public in the event of a nuclear accident GB/T 17150-1997 Radiological protection monitoring procedure--Part 1:Industrial X-ray detection GB/T 16841-1997 Guide for dosimetry in an electron beam facility for radiation processing at energies between 300keV and 25MeV GB/T 16142-1995 Annual limits on intake of some radionuclides for the public members with the different age GB/T 16141-1995 Analytical method for radionuclides by alpha spectrometry GB/T 16139-1995 Dose conversion coefficients for use inprotection against neutron radiation GB/T 16147-1995 Scintillation flask method for measuring radon concentration in the air
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.