GB/T 17150-1997
AbolishedRadiological protection monitoring procedure--Part 1:Industrial X-ray detection
放射卫生防护监测规范 第1部分:工业X射线探伤
Application Summary AI generated
This standard specifies the procedures for monitoring radiological protection in industrial X-ray detection, covering the measurement of radiation dose rates and contamination levels in workplaces. It is applied in industries such as manufacturing, construction, and materials testing where X-ray equipment is used for non-destructive inspection of welds, castings, and structural components. The standard ensures compliance with safety regulations by guiding the assessment of occupational exposure and environmental radiation hazards.
Related Standards
GB/T 13163.2-2005
Radiation protection instrumentation-Radon and radon decay product measuring instruments-Part2:Specific requirements for radon measruing instruments
GB/T 17982-2000
Models and parameters forcalculating radiation doses to the public in the event of a nuclear accident
GB/T 16841-1997
Guide for dosimetry in an electron beam facility for radiation processing at energies between 300keV and 25MeV
GB/T 16142-1995
Annual limits on intake of some radionuclides for the public members with the different age
GB/T 16141-1995
Analytical method for radionuclides by alpha spectrometry
GB/T 16139-1995
Dose conversion coefficients for use inprotection against neutron radiation
GB/T 16147-1995
Scintillation flask method for measuring radon concentration in the air
GB/T 16145-1995
Gamma spectrometry method of analysing radionuclides in biological samples
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.