GB/T 16640-2008
ActiveStandard guide for selection and calibration of dosimetry systems for radiation processing
辐射加工剂量测量系统的选择和校准导则
Application Summary AI generated
This standard provides guidelines for selecting and calibrating dosimetry systems used to measure absorbed dose in radiation processing applications, such as sterilization of medical devices, food irradiation, and polymer modification. It is applied by facilities and laboratories that operate gamma, electron beam, or X-ray radiation sources to ensure accurate dose measurement for process validation and quality control. The standard specifies procedures for system selection based on dose range, energy, and environmental conditions, as well as calibration methods to maintain traceability to national measurement standards.
Related Standards
GB/T 12162.2-2004
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 2:Dosimetry for radiation protection over the energy ranges 8keV to 1.3 MeV and 4MeV to 9MeV
GB/T 12162.3-2004
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 3:Calibration of area and personal dosemeters and the measurement of their response as a function of en
GB/T 7165.1-2005
Equipment for continuous monitoring of radioactivity in gaseous effluents Part1:General requirements
GB/Z 28820.4-2022
Long-term radiation ageing in polymers—Part 4: Effects of different temperatures and dose rates under radiation conditions
GB/T 17680.10-2003
Criteria for emergency planning and preparedness for nuclear power plants--Criteria for emergency radiological field monitoring，sampling and analysis conducted by nuclear power plant operating organizations
GB/T 10257-2001
Quality inspection rule for nuclear instruments and nuclear radiation detectors
GB/T 12162.1-2000
X and gamma reference radiation for calibrating dose meters and doserate meters and for determining their response as a function of photon energy--Part 1:Radiation characteristics and production methods
GB/T 12128.2-1999
Reference sources for the calibration of surface contamination monitors--Part 2:Electrons of energy less than 0.15MeV and photons of energy less than 1.5MeV
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.