GB/T 12164.1-2008
ActiveReference beta radiations - Part 1: Methods of production
β参考辐射 第1部分：产生方法
Application Summary AI generated
GB/T 12164.1-2008 specifies methods for producing reference beta radiation fields used to calibrate dosimeters and dose-rate meters. It is applied in radiation protection metrology, particularly for testing and verifying the performance of personal and environmental monitoring equipment exposed to beta-emitting sources. The standard is relevant to nuclear facilities, medical radiotherapy, and industrial radiography where accurate beta radiation measurement is critical.
Related Standards
GB/T 12162.2-2004
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 2:Dosimetry for radiation protection over the energy ranges 8keV to 1.3 MeV and 4MeV to 9MeV
GB/T 12162.3-2004
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy--Part 3:Calibration of area and personal dosemeters and the measurement of their response as a function of en
GB/T 7165.1-2005
Equipment for continuous monitoring of radioactivity in gaseous effluents Part1:General requirements
GB/Z 28820.4-2022
Long-term radiation ageing in polymers—Part 4: Effects of different temperatures and dose rates under radiation conditions
GB/T 17680.10-2003
Criteria for emergency planning and preparedness for nuclear power plants--Criteria for emergency radiological field monitoring，sampling and analysis conducted by nuclear power plant operating organizations
GB/T 10257-2001
Quality inspection rule for nuclear instruments and nuclear radiation detectors
GB/T 12162.1-2000
X and gamma reference radiation for calibrating dose meters and doserate meters and for determining their response as a function of photon energy--Part 1:Radiation characteristics and production methods
GB/T 12128.2-1999
Reference sources for the calibration of surface contamination monitors--Part 2:Electrons of energy less than 0.15MeV and photons of energy less than 1.5MeV
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.