NY/T 506-2002
AbolishedTechnical specifications for combined mount planting plough body with tooth wings
组合式齿翼垄作犁体技术条件
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 规格与基本尺寸 Foreword → 1 Scope → 2 Normative References → 3 Specifications and Basic Dimensions
Scope
This standard specifies the specifications and basic dimensions, technical requirements, inspection rules, marking, packaging and storage of combined mount planting plough body with tooth wings. This standard applies to combined mount planting plough body with tooth wings for ridging and intertillage machinery with ridge spacing within 75 cm, and ridging and hilling parts for special purposes may refer to it for implementation.
本标准规定了组合式齿翼垄作犁体的规格与基本尺寸,技术要求,检验规则,标志,包装与贮存。本标准适用于垄距75cm以内起垄,中耕机械的组合式齿翼垄作犁体,特殊用途的起垄培土部件可参照执行。
Normative References
Keywords
Application Summary AI generated
Agricultural machinery manufacturers and farmers use this standard to design and produce combined ridge plough bodies with tooth wings, ensuring consistent dimensions, performance, and quality for ridging and intertillage operations. It is important for improving interchangeability and operational efficiency of ridge tillage equipment.
农业机械制造企业和农机使用者采用该标准来设计和生产组合式齿翼垄作犁体，确保产品在起垄和中耕作业中的尺寸、性能和质量符合统一要求。该标准对提高垄作机械的互换性和作业效率具有重要意义。
AI Summary AI generated
This standard specifies specifications, basic dimensions, technical requirements, inspection rules, marking, packaging, and storage for combined ridge plough bodies with tooth wings, applicable to ridging and intertillage machinery with ridge spacing up to 75 cm. It references GB/T 2828 and JB/T 5573 for inspection and coating, ensuring reliability and interchangeability in agricultural operations.
该标准规定了组合式齿翼垄作犁体的规格、基本尺寸、技术要求、检验规则、标志、包装与贮存，适用于垄距75厘米以内的起垄和中耕机械。标准引用GB/T 2828和JB/T 5573作为检验和涂装依据，确保产品在农业作业中的可靠性和互换性。
Key Sentences extracted from text
本标准规定了组合式齿翼垄作犁体的规格与基本尺寸,技术要求,检验规则,标志,包装与贮存。
本标准适用于垄距75cm以内起垄,中耕机械的组合式齿翼垄作犁体,特殊用途的起垄培土部件可参照执行。
组合式齿翼垄作犁体如图1,两翼成齿状结构,左右分土板的张开宽度可调节。
下列标准所包含的条文,通过在本标准中引用而构成为本标准的条文。
所有标准都会修订,使用本标准的各方应探讨使用下列标准最新版本的可能性。
This standard specifies the specifications and basic dimensions, technical requirements, inspection rules, marking, packaging and storage of combined mount planting plough body with tooth wings.
This standard applies to combined mount planting plough body with tooth wings for ridging and intertillage machinery with ridge spacing within 75 cm, and ridging and hilling parts for special purposes may refer to it for implementation.
The combined mount planting plough body with tooth wings is shown in Figure 1, with the two wings forming a tooth structure, and the opening width of the left and right soil plates is adjustable.
The clauses contained in the following standards constitute the clauses of this standard through reference in this standard.
All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards.