NY 687-2003
AbolishedDischarge standard of wastewater pollution for natural rubber processing
天然橡胶加工废水污染物排放标准
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 术语和定义 → 4 标准值 Foreword → 1 Scope → 2 Normative References → 3 Terms and Definitions → 4 Standard Values
Scope
This standard specifies, according to production process and discharge destination of wastewater pollutants, the maximum allowable discharge concentration of wastewater pollutants and the maximum allowable discharge volume per ton of product for natural rubber processing, by time periods. This standard applies to the supervision and management of discharge of wastewater pollutants from natural rubber processing, as well as environmental impact assessment, design, completion acceptance and discharge management after construction of construction projects.
本标准按生产工艺和废水污染物排放去向，分年限规定了天然橡胶加工废水最高允许排放浓度及吨产品最高允许排水量。本标准适用于天然橡胶加工废水污染物的排放监督管理，以及建设项目的环境影响评价，设计，竣工验收及建成后的排放管理。
Normative References
Keywords
Application Summary AI generated
Natural rubber processing enterprises use this standard to control wastewater discharge, ensuring pollutant concentrations and discharge volumes meet requirements. Environmental protection authorities rely on it to supervise and manage industrial wastewater emissions. This standard is crucial for protecting water quality and promoting sustainable development in the rubber industry.
天然橡胶加工企业使用这个标准来控制废水排放，确保污染物浓度和排水量符合规定。环保部门用它来监督和管理企业的废水排放行为。该标准对保护水环境、促进橡胶行业可持续发展具有重要意义。
AI Summary AI generated
NY 687-2003 specifies maximum allowable discharge concentrations of pollutants and discharge volume per ton of product for wastewater from natural rubber processing, categorized by time periods and discharge destinations. It applies to emission supervision, environmental impact assessment, design, and acceptance of projects. The standard references multiple water quality testing methods to ensure consistent monitoring. Its purpose is to control water pollution from rubber processing and promote cleaner production in the industry.
NY 687-2003《天然橡胶加工废水污染物排放标准》规定了天然橡胶加工过程中废水污染物的最高允许排放浓度和吨产品排水量，按不同年限和排放去向分类管理。标准适用于企业排放监督、环评、设计和验收。引用多项水质检测方法标准，确保检测一致性。该标准旨在控制橡胶加工废水对水环境的污染，推动行业清洁生产。
Key Sentences extracted from text
本标准按生产工艺和废水污染物排放去向，分年限规定了天然橡胶加工废水最高允许排放浓度及吨产品最高允许排水量。
本标准适用于天然橡胶加工废水污染物的排放监督管理，以及建设项目的环境影响评价，设计，竣工验收及建成后的排放管理。
下列文件中的条款通过本标准的引用而成为本标准的条款。
凡是注日期的引用文件，其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准。
本标准按不同年限分别规定了天然橡胶加工废水污染物最高允许排放浓度，吨产品最高允许排水量。
This standard specifies, according to production process and discharge destination of wastewater pollutants, the maximum allowable discharge concentration of wastewater pollutants and the maximum allowable discharge volume per ton of product for natural rubber processing, by time periods.
This standard applies to the supervision and management of discharge of wastewater pollutants from natural rubber processing, as well as environmental impact assessment, design, completion acceptance and discharge management after construction of construction projects.
The provisions in the following documents become provisions of this standard through reference in this standard.
For dated references, subsequent amendments (excluding corrigenda) or revisions do not apply to this standard.
This standard specifies, by different time periods, the maximum allowable discharge concentration of wastewater pollutants and the maximum allowable discharge volume per ton of product for natural rubber processing.