JB/T 5917-2006
AbolishedBag cage for baghouse
袋式除尘器用滤袋框架
Catalogue
前言 → 1 范围 → 2 术语和定义 → 3 滤袋框架的分类 → 4 技术要求 → 4.1 支撑环间距 → 4.2 纵筋间距 → 4.3 焊点 → 4.4 表面光洁度 → 4.5 表面处理 → 4.6 直径公差 → 4.7 扁袋端面公差 → 4.8 长度公差 → 4.9 滤袋框架垂直度公差 → 5 检验规则 → 5.1 支撑环间距 → 5.2 纵筋间距 → 5.3 焊点牢固度检验 → 5.4 表面光洁度检验 → 5.5 圆袋框架直径公差检验 → 5.6 扁袋框架周长公差检验 → 5.7 长度公差检验 → 5.8 垂直度公差检验 → 5.9 载荷检验 → 5.10 出厂检验 → 5.11 型式试验 → 6 包装、贮存和运输条件 → 6.1 包装 → 6.2 贮存和运输 Foreword → 1 Scope → 2 Terms and Definitions → 3 Classification of Bag Cages → 4 Technical Requirements → 4.1 Support Ring Spacing → 4.2 Longitudinal Bar Spacing → 4.3 Weld Points → 4.4 Surface Finish → 4.5 Surface Treatment → 4.6 Diameter Tolerance → 4.7 Flat Bag End Face Tolerance → 4.8 Length Tolerance → 4.9 Bag Cage Verticality Tolerance → 5 Inspection Rules → 5.1 Support Ring Spacing → 5.2 Longitudinal Bar Spacing → 5.3 Weld Point Firmness Inspection → 5.4 Surface Finish Inspection → 5.5 Round Bag Frame Diameter Tolerance Inspection → 5.6 Flat Bag Frame Perimeter Tolerance Inspection → 5.7 Length Tolerance Inspection → 5.8 Verticality Tolerance Inspection → 5.9 Load Inspection → 5.10 Factory Inspection → 5.11 Type Test → 6 Packaging, Storage and Transportation Conditions → 6.1 Packaging → 6.2 Storage and Transportation
Scope
1 Scope This standard specifies the classification, technical requirements, inspection rules, and packaging, storage and transportation conditions for bag cages used in baghouses. This standard applies to bag cages for baghouses.
1 范围 本标准规定了袋式除尘器用滤袋框架的分类、技术要求、检验规则和包装、贮存和运输条件。 本标准适用于袋式除尘器用滤袋框架。
Keywords
Application Summary AI generated
Manufacturers and users of baghouses use this standard to design and accept bag cages. It ensures critical parameters such as support ring spacing, longitudinal bar spacing, and weld point strength meet requirements, thereby guaranteeing filtration efficiency and long-term stable operation. This standard is essential for improving the reliability and service life of baghouses.
袋式除尘器制造商和用户使用该标准来设计和验收滤袋框架。它确保框架的支撑环间距、纵筋间距、焊点牢固度等关键参数符合要求，从而保证除尘器的过滤效率和长期稳定运行。该标准对提高袋式除尘器的可靠性和使用寿命至关重要。
AI Summary AI generated
This standard specifies the classification, technical requirements, inspection rules, and packaging, storage and transportation conditions for bag cages used in baghouses. Technical requirements cover key parameters such as support ring spacing, longitudinal bar spacing, weld point firmness, surface finish, surface treatment, diameter tolerance, flat bag end face tolerance, length tolerance, and verticality tolerance. Inspection rules include checks for support ring spacing, longitudinal bar spacing, weld point firmness, surface finish, diameter tolerance, perimeter tolerance, length tolerance, verticality tolerance, load testing, factory inspection, and type testing. Packaging, storage and transportation conditions ensure the product is not damaged during transport and storage.
本标准规定了袋式除尘器用滤袋框架的分类、技术要求、检验规则及包装、贮存和运输条件。技术要求涵盖支撑环间距、纵筋间距、焊点牢固度、表面光洁度、表面处理、直径公差、扁袋端面公差、长度公差及垂直度公差等关键参数。检验规则包括支撑环间距、纵筋间距、焊点牢固度、表面光洁度、直径公差、周长公差、长度公差、垂直度公差、载荷检验、出厂检验和型式试验。包装、贮存和运输条件确保产品在运输和储存过程中不受损坏。
Key Sentences extracted from text
本标准规定了袋式除尘器用滤袋框架的分类、技术要求、检验规则和包装、贮存和运输条件。
本标准适用于袋式除尘器用滤袋框架。
支撑环间距应均匀，其极限偏差为±5mm。
纵筋间距应均匀，其极限偏差为±3mm。
焊点应牢固，不得有脱焊、虚焊和漏焊。
This standard specifies the classification, technical requirements, inspection rules, and packaging, storage and transportation conditions for bag cages used in baghouses.
This standard applies to bag cages for baghouses.
The support ring spacing shall be uniform, with a limit deviation of ±5 mm.
The longitudinal bar spacing shall be uniform, with a limit deviation of ±3 mm.
Weld points shall be firm, without loose welding, false welding, or missing welding.
Standard Timeline
Changes from replaced version:
- 代替JB/T 5917-1991
- Replaces JB/T 5917-1991