JB/T 53326-1999

Wet Tubular Electrostatic Precipitator - Product Quality Grading (Internal Use)

湿式管型电除尘器 产品质量分等(内部使用)

Standard Type
JB/T
ICS
N/A
CCS
J 88
Status
N/A
Issue Date
1999-12-30
Implementation
2000-06-01
Centralized Committee
环境保护机械标准化技术委员会 / Technical Committee for Environmental Protection Machinery Standardization
Issuing Authority
国家机械工业局 / State Bureau of Machinery Industry

Catalogue

前言 → 1 范围 → 2 引用标准 → 3 质量分等规定 → 4 试验方法 Foreword → 1 Scope → 2 Normative References → 3 Quality Grading Provisions → 4 Test Methods

Scope

This standard specifies the quality grading and test methods for wet tubular electrostatic precipitator products. This standard applies to the quality grading of products specified in JB/T 6409-1992 "Wet tubular electrostatic precipitator for gas".

本标准规定了湿式管型电除尘器产品的质量分等和试验方法。本标准适用于JB/T 6409—1992《煤气用湿式管型电除尘器》规定的产品的质量分等。

Normative References

GB/T 13931-1992 JB/T 6409-1992

Keywords

湿式管型电除尘器 (wet tubular electrostatic precipitator) 产品质量分等 (product quality grading) 除尘效率 (dust removal efficiency) 压力降 (pressure drop) 年可运行时间 (annual operable time) 合格品 (qualified product) 一等品 (first-class product) 优等品 (premium product)

Application Summary AI generated

Manufacturers and users of environmental protection equipment use this standard to grade the quality of wet tubular electrostatic precipitators. It classifies products into three levels—qualified, first-class, and premium—based on key metrics like dust removal efficiency, pressure drop, and annual operable time. This standard ensures reliable performance and consistency in industrial applications such as gas treatment.

这个标准由环保设备制造商和用户使用,用于对湿式管型电除尘器进行质量等级评定。它通过除尘效率、压力降和年可运行时间等关键指标,将产品分为合格品、一等品和优等品,帮助用户选择合适质量的产品。该标准确保了电除尘器在煤气处理等工业应用中的可靠性和性能一致性。

AI Summary AI generated

This standard JB/T 53326-1999 specifies the quality grading and test methods for wet tubular electrostatic precipitators, applicable to products defined in JB/T 6409-1992. It classifies products into three grades: qualified, first-class, and premium, based on dust removal efficiency, pressure drop, and annual operable time under design conditions. Test methods follow GB/T 13931. Intended for internal use, the standard aims to unify quality evaluation and ensure reliable operation in gas treatment applications.

本标准JB/T 53326-1999规定了湿式管型电除尘器的产品质量分等和试验方法,适用于JB/T 6409-1992中定义的产品。标准将产品分为合格品、一等品和优等品三个等级,评定依据包括除尘效率、压力降和设计条件下年可运行时间。试验方法参照GB/T 13931执行。该标准为内部使用,旨在统一质量评价体系,确保设备在煤气处理等领域的可靠运行。

Key Sentences extracted from text

1.

本标准规定了湿式管型电除尘器产品的质量分等和试验方法。

2.

产品质量分为合格品、一等品和优等品三个等级。

3.

煤气用湿式管型电除尘器产品质量分等由除尘效率、压力降两项性能指标和设计条件下年可运行时间的可靠性指标来评定(见表1)。

4.

当三个质量分等指标都达到表1 要求时,相对应的等级即为该产品的质量等级。

5.

湿式管型电除尘器的试验方法按GB/T 13931 的规定。

7.

This standard specifies the quality grading and test methods for wet tubular electrostatic precipitator products.

8.

Product quality is divided into three grades: qualified product, first-class product, and premium product.

9.

The quality grading of wet tubular electrostatic precipitators for gas is assessed by two performance indicators—dust removal efficiency and pressure drop—and the reliability indicator of annual operable time under design conditions (see Table 1).

10.

When all three quality grading indicators meet the requirements of Table 1, the corresponding grade is the product's quality grade.

11.

The test method for wet tubular electrostatic precipitators shall be in accordance with GB/T 13931.

Standard Timeline

replaces JB/T 53326.2-94

Changes from replaced version:

  • 主要技术指标:除尘效率,压力降,设计条件下,年可运行时间有所不同
  • 取消单项指标
  • Main technical indicators: dust removal efficiency, pressure drop, and annual operable time under design conditions have changed
  • Cancellation of individual indicators
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.