JB/T 53228-1999
Vertical Bag Forming-Filling-Sealing Machine - Product Quality Grading
立式袋成型–充填–封口机 产品质量分等
Catalogue
前言 → 1 范围 → 2 引用标准 → 3 产品的质量等级 → 4 试验方法 → 5 抽样与评定方法 Foreword → 1 Scope → 2 Normative References → 3 Product Quality Grades → 4 Test Methods → 5 Sampling and Evaluation Methods
Scope
This standard specifies the quality grades, test methods, sampling and evaluation methods for vertical bag forming-filling-sealing machines with a packaging capacity not greater than 1500 mL. This standard applies to vertical bag forming-filling-sealing machines (hereinafter referred to as packaging machines) as specified in JB/T 7549.4-1994 "Vertical Bag Forming-Filling-Sealing Machine".
本标准规定了包装容量不大于1500mL 的立式袋成型–充填–封口机的质量等级，试验方法和抽样及评定方法等。本标准适用于JB/T 7549.4—1994《立式袋成型–充填–封口机》规定的立式袋成型–充填–封口机（以下简称包装机）。
Normative References
Keywords
Application Summary AI generated
Manufacturers and quality inspection agencies use this standard to grade the quality of vertical bag forming-filling-sealing machines. It classifies products into qualified, first-class, and premium grades based on indicators such as heat seal deviation, bag length control, availability, noise, and pass rate. This standard provides a unified quality grading basis within the industry, helping to improve the overall quality of packaging machinery.
包装机制造商和质检机构使用本标准来评定立式袋成型–充填–封口机的质量等级。通过热封偏差、袋长控制、可用度、噪声和合格率等指标，将产品分为合格品、一等品和优等品。该标准为行业内部提供了统一的质量分等依据，有助于提升包装机械的整体质量水平。
AI Summary AI generated
This standard JB/T 53228-1999 specifies the product quality grading requirements for vertical bag forming-filling-sealing machines, applicable to models with a packaging capacity not exceeding 1500 mL. It classifies products into three grades: qualified, first-class, and premium. Assessment indicators include heat seal temperature deviation, bag length control deviation, availability, noise, and packaging pass rate. Test methods reference JB/T 7549.4, sampling is random, and grading is based on meeting all indicators or the lowest one. This internal-use standard replaces the 1994 version with no major technical changes.
本标准JB/T 53228-1999规定了立式袋成型–充填–封口机的产品质量分等要求，适用于包装容量不超过1500mL的机型。标准将产品分为合格品、一等品和优等品三个等级，考核指标包括热封温度偏差、袋长控制偏差、可用度、噪声和包装成品合格率等。试验方法引用JB/T 7549.4，抽样采用随机方式，评定以全部指标达标或最低指标定级。该标准为内部使用，替代了1994年版本，主要技术内容未变。
Key Sentences extracted from text
本标准规定了包装容量不大于1500mL 的立式袋成型–充填–封口机的质量等级，试验方法和抽样及评定方法等。
包装机产品根据其质量水平和使用价值分为合格品、一等品和优等品三个等级。
包装机产品质量除应符合JB/T 7549.4 规定外，各等级的考核项目、指标要求还应按表1 规定。
抽样采用随机抽样，可在生产厂、用户或经销部门抽取。
按第3章所规定的等级要求，全部项目指标实测结果均达到，或按其中达到的最低一项指标定等级。
This standard specifies the quality grades, test methods, sampling and evaluation methods for vertical bag forming-filling-sealing machines with a packaging capacity not greater than 1500 mL.
Packaging machine products are divided into three grades: qualified product, first-class product, and premium product, based on their quality level and use value.
In addition to complying with the provisions of JB/T 7549.4, the assessment items and indicator requirements for each grade shall also comply with the provisions of Table 1.
Sampling shall be random, and may be conducted at the manufacturer, user, or distribution department.
According to the grade requirements specified in Chapter 3, the actual measured results of all item indicators shall be met, or the grade shall be determined by the lowest indicator achieved.
Standard Timeline
Changes from replaced version:
- 对原标准作了编辑性修改
- 主要技术内容没有变化
- Editorial modifications were made to the original standard
- No changes in main technical content