JB/T 53160-1999
Plate-and-frame pressure oil filter - Product quality grading (Internal use)
板框式加压滤油机 产品质量分等（内部使用）
Catalogue
前言 → 1 范围 → 2 引用标准 → 3 产品的质量等级 → 4 试验与检验方法 → 5 抽样与等级评定方法 → 附录A Foreword → 1 Scope → 2 Normative References → 3 Product Quality Grades → 4 Test and Inspection Methods → 5 Sampling and Grade Evaluation Methods → Appendix A
Scope
This standard specifies the quality grades, test methods, and sampling and evaluation methods for plate-and-frame pressure oil filters (hereinafter referred to as oil filters). This standard applies to oil filters.
本标准规定了板框式加压滤油机（以下简称滤油机）产品的质量等级、试验方法和抽样与评定方法。本标准适用于滤油机。
Normative References
Keywords
Application Summary AI generated
Manufacturers of plate-and-frame pressure oil filters use this standard to classify product quality levels, ensuring compliance with qualified or first-grade requirements. Quality inspection agencies and customers rely on this standard for product acceptance and performance evaluation. By providing a unified quality grading system, the standard enhances the reliability and market competitiveness of oil filters.
滤油机制造商使用本标准来划分产品的质量等级，确保产品达到合格品或一等品要求。质检部门和用户依据本标准进行产品验收和性能评估。该标准通过统一的质量分等体系，提升了滤油机产品的可靠性和市场竞争力。
AI Summary AI generated
This standard specifies the product quality grading requirements for plate-and-frame pressure oil filters, including two grades: qualified product and first-grade product. It details assessment items for each grade, such as flow rate, oil leakage, breakdown voltage, noise, part qualification rate, and mean time between failures. The standard also defines test and inspection methods, sampling plans, and grade evaluation rules, applicable to quality control and acceptance of oil filters.
本标准规定了板框式加压滤油机的产品质量分等要求，包括合格品和一等品两个等级。标准详细列出了各等级的考核项目，如流量、渗油量、击穿电压、噪声、零件合格率及平均无故障时间等指标。同时规定了试验与检验方法、抽样方案及等级评定规则，适用于滤油机的质量控制和验收。
Key Sentences extracted from text
本标准规定了板框式加压滤油机（以下简称滤油机）产品的质量等级、试验方法和抽样与评定方法。
滤油机产品根据其质量水平和使用价值分为合格品和一等品两个等级。
滤油机产品除符合JB/T 5153.1和JB/T 5153.2 的规定外，各等级的考核项目、指标要求还应符合表1 的规定。
抽样检查的滤油机产品应是通过鉴定、具备批量生产条件、并经制造厂自检合格的产品。
按相应的质量分等标准逐条逐项进行检查，被抽检单机各项指标均达到某等级指标要求，才能评为该等级。
This standard specifies the quality grades, test methods, and sampling and evaluation methods for plate-and-frame pressure oil filters (hereinafter referred to as oil filters).
Oil filter products are divided into two grades: qualified product and first-grade product, based on their quality level and use value.
In addition to complying with the provisions of JB/T 5153.1 and JB/T 5153.2, the assessment items and indicator requirements for each grade shall also comply with the provisions of Table 1.
The oil filter products subject to sampling inspection shall be products that have passed the appraisal, have the conditions for batch production, and have passed the manufacturer's self-inspection.
Inspection shall be carried out item by item according to the corresponding quality grading standard, and the inspected single machine can only be rated as that grade if all indicators meet the requirements of a certain grade.
Standard Timeline
Changes from replaced version:
- 对原标准作了编辑性修改，主要技术内容没有变化。
- Editorial modifications were made to the original standard, with no changes to the main technical content.