JB/T 53080-1999
Plastic Extrusion Rotary Table Shoe Making Machine - Product Quality Grading (Internal Use)
塑料挤出转盘制鞋机 产品质量分等（内部使用）
Catalogue
前言 → 1 范围 → 2 引用标准 → 3 产品质量等级 → 4 试验方法 → 5 抽样与评定方法 Foreword → 1 Scope → 2 Normative References → 3 Product Quality Grades → 4 Test Methods → 5 Sampling and Evaluation Methods
Scope
This standard specifies the quality grades, test methods, and sampling and evaluation methods for plastic extrusion rotary table shoe making machine products. This standard applies to the product quality grading of plastic extrusion rotary table shoe making machines (hereinafter referred to as shoe machines) as specified in JB/T 6929-1993 "Plastic Extrusion Rotary Table Shoe Making Machine".
本标准规定了塑料挤出转盘制鞋机产品的质量等级、试验方法和抽样与评定方法。 本标准适用于JB/T 6929—1993《塑料挤出转盘制鞋机》规定的塑料挤出转盘制鞋机（以下简称鞋机）产品质量分等。
Normative References
Keywords
Application Summary AI generated
Shoe machine manufacturers and quality inspection agencies use this standard to grade the quality of plastic extrusion rotary table shoe making machines. It sets key performance indicators such as rated output, clamping forces, energy consumption, and noise levels to distinguish between qualified, first-grade, and premium products. This standard is important for ensuring product quality, promoting technological improvement, and regulating the market.
鞋机制造商和质检机构使用本标准来评定塑料挤出转盘制鞋机的质量等级。它通过设定额定产量、锁紧力、单耗和噪声等关键指标，帮助用户区分合格品、一等品和优等品。该标准对于确保鞋机产品质量、促进技术升级和规范市场具有重要意义。
AI Summary AI generated
This standard JB/T 53080-1999 specifies the product quality grading requirements for plastic extrusion rotary table shoe making machines, defining three grades: qualified, first-grade, and premium. It sets specific numerical targets for key indicators such as rated output, shoe mold clamping force, shoe last clamping force, energy consumption per unit, and noise level. The standard also provides test methods and sampling evaluation rules. It applies to shoe machines manufactured according to JB/T 6929-1993 and aims to promote product quality improvement through quantified metrics.
本标准JB/T 53080-1999规定了塑料挤出转盘制鞋机的产品质量分等要求，包括合格品、一等品和优等品三个等级。标准明确了额定产量、鞋模锁紧力、鞋楦锁紧力、单耗和噪声等考核指标的具体数值，并给出了试验方法及抽样评定规则。该标准适用于按JB/T 6929-1993制造的鞋机，旨在通过量化指标促进产品质量提升。
Key Sentences extracted from text
本标准规定了塑料挤出转盘制鞋机产品的质量等级、试验方法和抽样与评定方法。
鞋机产品根据其质量水平和使用价值分为合格品（能生产平跟布鞋）、一等品和优等品（能生产普通旅游鞋）三个等级。
鞋机产品除符合JB/T 6929 规定外，各等级的考核项目、指标要求还应符合表1 的规定。
抽样产品必须是制造厂检验部门检验合格入库或出厂在用户处未开箱的批量产品，抽检样本不少于2 台，全部检测项目采取一次性检测。
评定产品质量等级，必须符合该等级全部考核项目的技术要求，否则按达到的最低一项指标定等级。
This standard specifies the quality grades, test methods, and sampling and evaluation methods for plastic extrusion rotary table shoe making machine products.
Shoe machine products are divided into three grades according to their quality level and use value: qualified product (capable of producing flat-heel cloth shoes), first-grade product, and premium product (capable of producing ordinary travel shoes).
In addition to complying with JB/T 6929, the assessment items and indicator requirements for each grade shall also comply with the provisions of Table 1.
Sampled products must be batch products that have passed inspection by the manufacturer's inspection department and are in storage or delivered to the user unopened; the sample size shall be no less than 2 units, and all test items shall be tested at one time.
When evaluating the product quality grade, it must meet the technical requirements of all assessment items for that grade; otherwise, the grade shall be determined by the lowest indicator achieved.
Standard Timeline
Changes from replaced version:
- 对原标准作了编辑性修改
- 主要技术内容没有变化
- Editorial modifications were made to the original standard
- The main technical content remained unchanged