JB/T 53054-1999
General Reciprocating Piston Air Compressor - Product Quality Grading (Internal Use)
一般用往复活塞空气压缩机 产品质量分等（内部使用）
Catalogue
前言 → 1 范围 → 2 引用标准 → 3 基本要求 → 4 产品质量分等 Foreword → 1 Scope → 2 Normative References → 3 Basic Requirements → 4 Product Quality Grading
Scope
This standard specifies the product quality grades, test methods, sampling methods, and evaluation methods for general reciprocating piston air compressors (hereinafter referred to as air compressors). This standard applies to air compressors with a nominal discharge pressure not greater than 1.4 MPa and a driving motor rated power not greater than 560 kW.
本标准规定了一般用往复活塞空气压缩机（以下简称空压机）的产品质量等级、试验方法、抽样方法和评定方法。本标准适用于公称排气压力不大于1.4 MPa、驱动电动机额定功率不大于560 kW 的空压机。
Normative References
Keywords
Application Summary AI generated
Air compressor manufacturers and quality inspection agencies use this standard to evaluate product quality grades. It classifies products into qualified, first-class, and superior grades based on specific power, noise, and vibration indicators. This standard helps unify the quality evaluation system within the industry and enhances product competitiveness.
空压机制造商和质检机构使用本标准来评定产品的质量等级。它通过比功率、噪声和振动等指标，将产品分为合格品、一等品和优等品。该标准有助于统一行业内的质量评价体系，提升产品竞争力。
AI Summary AI generated
This standard JB/T 53054－1999 replaces the previous version JB/T 53054—92 and specifies the product quality grading requirements for general reciprocating piston air compressors. It classifies products into three grades: qualified, first-class, and superior, primarily assessing specific power indicators, along with noise and vibration requirements. It applies to air compressors with nominal discharge pressure ≤1.4 MPa and motor power ≤560 kW. The standard unifies the noise measurement method to the engineering method and adjusts the significant digits of specific power indicators.
本标准JB/T 53054－1999替代了旧版JB/T 53054—92，规定了一般用往复活塞空气压缩机的产品质量分等要求。标准将产品分为合格品、一等品和优等品三个等级，主要考核比功率指标，并涉及噪声和振动要求。适用于公称排气压力≤1.4 MPa、电机功率≤560 kW的空压机。标准统一了噪声测定方法为工程法，并调整了比功率指标的有效位数。
Key Sentences extracted from text
本标准规定了一般用往复活塞空气压缩机（以下简称空压机）的产品质量等级、试验方法、抽样方法和评定方法。
空压机产品根据其质量水平和使用价值分为合格品、一等品和优等品三个等级。
驱动电动机额定功率不大于15kW 的空压机应符合GB/T 13928 的规定。
驱动电动机额定功率大于15kW 的空压机应符合GB/T 13279 的规定。
配用功率不小于18.5kW 的内燃机驱动的移动式空压机比功率指标为相同额定电动机功率及排气压力的固定式空压机比功率指标的1.06倍。
This standard specifies the product quality grades, test methods, sampling methods, and evaluation methods for general reciprocating piston air compressors (hereinafter referred to as air compressors).
Air compressor products are divided into three grades: qualified product, first-class product, and superior product, based on their quality level and use value.
Air compressors with a driving motor rated power not greater than 15 kW shall comply with the provisions of GB/T 13928.
Air compressors with a driving motor rated power greater than 15 kW shall comply with the provisions of GB/T 13279.
The specific power index of a mobile air compressor driven by an internal combustion engine with a matching power not less than 18.5 kW shall be 1.06 times that of a stationary air compressor with the same rated motor power and discharge pressure.
Standard Timeline
Changes from replaced version:
- 噪声声功率级的测定统一规定采用工程法，不再并用简易法
- 比功率指标的有效位数进行了适当的统一
- The measurement of noise sound power level is uniformly specified to adopt the engineering method, no longer using the simplified method concurrently.
- The significant digits of specific power indicators have been appropriately unified.