JB/T 53032-1999
Plastic Bag Making Machine - Product Quality Grading (Internal Use)
塑料制袋机 产品质量分等（内部使用）
Catalogue
前言 → 1 范围 → 2 引用标准 → 3 产品质量等级 → 4 试验方法 → 5 抽样与评定方法 Foreword → 1 Scope → 2 Normative References → 3 Product Quality Grade → 4 Test Methods → 5 Sampling and Evaluation Methods
Scope
This standard specifies the quality grades, test methods, and sampling and evaluation methods for plastic vest bag making machines and plastic cylindrical bag making machines. This standard applies to the product quality grading of plastic vest bag making machines and plastic cylindrical bag making machines (hereinafter referred to as bag making machines) as specified in JB/T 6493-1992 "Plastic Bag Making Machine".
本标准规定了塑料背心袋制袋机及塑料圆筒袋制袋机产品的质量等级、试验方法和抽样与评定方法。本标准适用于JB/T 6493—1992《塑料制袋机》规定的塑料背心袋制袋机及塑料圆筒袋制袋机（以下简称制袋机）产品质量分等。
Normative References
Keywords
Application Summary AI generated
Manufacturers of plastic bag making machines and quality inspection agencies use this standard to evaluate product quality grades. It helps manufacturers determine whether their products meet qualified, first-class, or premium standards, guiding production improvements and factory inspection. This standard is crucial for ensuring consistency and reliability of plastic bag making machines, contributing to the overall quality improvement of the industry.
塑料制袋机制造商和质检机构使用本标准来评定产品的质量等级。它帮助制造商确定产品是否达到合格品、一等品或优等品标准，从而指导生产改进和出厂检验。该标准对于保证塑料制袋机的一致性和可靠性至关重要，有助于提升行业整体质量水平。
AI Summary AI generated
This standard JB/T 53032-1999 is a revision of the product quality grading for plastic bag making machines, replacing the 1992 version. It classifies products into three grades: qualified, first-class, and premium, specifying assessment indicators such as bag length deviation, bottom width deviation, length variation, maximum bag making speed, maximum production line speed, and overall machine noise. Test methods reference JB/T 6493, and sampling requires at least 2 units, with grading based on the lowest indicator. It applies to plastic vest bag and cylindrical bag making machines, aiming to unify the quality evaluation system.
本标准JB/T 53032-1999是对塑料制袋机产品质量分等的修订，代替了1992年版本。标准将产品分为合格品、一等品和优等品三个等级，并规定了袋长偏差、底边宽偏差、长度变动量、最高制袋速度、最高生产线速度和整机噪声等考核指标。试验方法引用JB/T 6493，抽样与评定要求样本不少于2台，按最低指标定级。该标准适用于塑料背心袋和圆筒袋制袋机，旨在统一质量评价体系。
Key Sentences extracted from text
本标准规定了塑料背心袋制袋机及塑料圆筒袋制袋机产品的质量等级、试验方法和抽样与评定方法。
制袋机产品根据其质量水平和使用价值分为合格品、一等品和优等品三个等级。
制袋机产品除符合JB/T 6493 规定外，各等级的考核项目、指标要求还应按表1 的规定。
产品试验方法按JB/T 6493 的规定。
评定产品质量等级，必须符合该等级全部考核项目的技术要求，否则按达到的最低一项指标定等级。
This standard specifies the quality grades, test methods, and sampling and evaluation methods for plastic vest bag making machines and plastic cylindrical bag making machines.
Bag making machine products are divided into three grades: qualified product, first-class product, and premium product, based on their quality level and use value.
In addition to complying with JB/T 6493, the assessment items and index requirements for each grade shall also comply with the provisions of Table 1.
The product test methods shall comply with the provisions of JB/T 6493.
When evaluating the product quality grade, it must meet the technical requirements of all assessment items for that grade; otherwise, the grade shall be determined by the lowest index achieved.
Standard Timeline
Changes from replaced version:
- 对原标准作了编辑性修改，主要技术内容没有变化
- Editorial modifications were made to the original standard, with no changes to the main technical content.