JB/T 51243-1999
Peanut Sheller - Product Quality Grading
花生剥壳机 产品质量分等
Catalogue
前言 → 1 范围 → 2 引用标准 → 3 质量指标 → 4 试验方法 → 5 检验规则 Foreword → 1 Scope → 2 Normative References → 3 Quality Indicators → 4 Test Methods → 5 Inspection Rules
Scope
This standard specifies the product quality grading indicators, test methods, and inspection rules for peanut shellers. This standard applies to the product quality grading, inspection testing, and grade evaluation of peanut shellers (hereinafter referred to as shellers).
本标准规定了花生剥壳机的产品质量分等指标、检测方法和检验规则。本标准适用于花生剥壳机（以下简称剥壳机）产品质量分等、检验测试和等级评定。
Normative References
Keywords
Application Summary AI generated
Manufacturers and quality inspection agencies use this standard to evaluate the quality grade of peanut shellers. They rely on the performance indicators and test methods specified to classify and inspect shellers. This standard ensures consistent product quality and provides a unified evaluation basis for the market.
花生剥壳机制造商和质检机构使用本标准来评定产品的质量等级。他们依据本标准中的性能指标和检测方法，对剥壳机进行分级和检验。该标准确保了花生剥壳机产品的质量一致性，为市场提供了统一的评价依据。
AI Summary AI generated
This standard JB/T 51243-1999 specifies the product quality grading requirements for peanut shellers, including performance indicators (such as breakage rate, shelling rate, cleanliness, etc.) and overall assembly and appearance quality. Products are classified into three grades: qualified, first-class, and premium. The standard also defines test methods and inspection rules, using item-by-item assessment and sampling decision plans. It applies to quality evaluation and inspection testing of peanut shellers, providing a unified quality grading basis for the industry.
本标准JB/T 51243-1999规定了花生剥壳机的产品质量分等要求，包括性能指标（如破碎率、剥净率、清洁度等）和整机装配外观质量。产品分为合格品、一等品和优等品三个等级。标准还明确了试验方法和检验规则，采用逐项考核和抽样判定方案。该标准适用于花生剥壳机的质量评定和检验测试，为行业提供了统一的质量分级依据。
Key Sentences extracted from text
本标准规定了花生剥壳机的产品质量分等指标、检测方法和检验规则。
按剥壳机产品的技术水平和质量水平，分为合格品、一等品和优等品。
在加工花生果达到GB/T 1532—1986 规定的三等条件下，剥壳机的产品质量分等指标应符合表1、表2 的规定。
破碎率、损伤率、剥净率、清洁度、损失率、吨果耗电、有效度、噪声等项目按JB/T 5688.2 的有关规定。
采用逐项考核，不合格项目分类表中各组达到的最低等级为产品等级。
This standard specifies the product quality grading indicators, test methods, and inspection rules for peanut shellers.
According to the technical level and quality level of the sheller product, it is divided into qualified product, first-class product, and premium product.
Under the condition that the processed peanut pods meet the third grade specified in GB/T 1532-1986, the product quality grading indicators of the sheller shall comply with the provisions of Table 1 and Table 2.
Items such as breakage rate, damage rate, shelling rate, cleanliness, loss rate, power consumption per ton of pods, effectiveness, and noise shall be in accordance with the relevant provisions of JB/T 5688.2.
Adopt item-by-item assessment, and the lowest grade achieved by each group in the nonconforming item classification table shall be the product grade.
Standard Timeline
Changes from replaced version:
- 对原标准作了编辑性修改
- 主要技术内容没有变化
- Editorial modifications were made to the original standard
- The main technical content remained unchanged