JB/T 51154-1999
Ignition Coil for Magneto - Product Quality Grading
磁电机用点火线圈 产品质量分等
Catalogue
前言 → 1 范围 → 2 引用标准 → 3 技术要求 → 4 试验方法 → 5 质量检查抽样方法 Foreword → 1 Scope → 2 Normative References → 3 Technical Requirements → 4 Test Methods → 5 Quality Inspection Sampling Methods
Scope
This standard specifies the quality grading indicators, test methods, and quality inspection sampling methods for ignition coils for magnetos (hereinafter referred to as ignition coils). This standard applies to product quality grading, quality spot checks, and supervision and inspection of ignition coils for various purposes (except aviation).
本标准规定了磁电机用点火线圈（以下简称点火线圈）质量分等指标，试验方法，质量检查抽样方法。本标准适用于各种用途（除航空外）的点火线圈产品质量分等、质量抽查、监督检验。
Normative References
Keywords
Application Summary AI generated
Manufacturers and quality inspection agencies of ignition coils for magnetos use this standard to grade and test products. They classify products into qualified, first-class, and premium grades based on the indicators and test methods specified in this standard. This standard is important for ensuring consistent quality, improving product reliability, and regulating market supervision.
磁电机用点火线圈的制造商和质检机构使用本标准来对产品进行质量分等和检验。他们依据本标准中的指标和试验方法，将产品划分为合格品、一等品和优等品三个等级。本标准对于确保点火线圈的质量一致性、提升产品可靠性以及规范市场监督具有重要意义。
AI Summary AI generated
This standard JB/T 51154-1999 specifies quality grading indicators, test methods, and sampling inspection rules for ignition coils for magnetos, applicable to all uses except aviation. It classifies products into three grades: qualified, first-class, and premium, and details performance indicators such as continuous firing performance, dielectric strength, DC resistance, inductance, and peak voltage with corresponding grade requirements. Test methods follow JB/T 9865.2, and sampling inspection follows GB/T 2828. This standard replaces JB/T 51154-94, with major changes including the addition of secondary peak voltage, winding resistance and inductance checks, immersion and drop tests, and the removal of the impact test.
本标准JB/T 51154-1999规定了磁电机用点火线圈的质量分等指标、试验方法和抽样检查规则，适用于除航空外的各种用途。标准将产品分为合格品、一等品和优等品三个等级，并详细列出了连续发火性能、绝缘强度、直流电阻、电感、峰值电压等多项性能指标及其对应的等级要求。试验方法参照JB/T 9865.2，抽样检查按GB/T 2828执行。本标准替代了JB/T 51154-94，主要增加了次级峰值电压、绕组电阻和电感检查、浸水及下落试验，取消了冲击试验。
Key Sentences extracted from text
本标准规定了磁电机用点火线圈（以下简称点火线圈）质量分等指标，试验方法，质量检查抽样方法。
本标准适用于各种用途（除航空外）的点火线圈产品质量分等、质量抽查、监督检验。
点火线圈产品按其主要性能达到的不同质量指标区分为合格品、一等品和优等品三个等级。
抽样检查产品质量时，按GB/T 2828 规定的正常检查一次抽样方案进行。
没有企业标准、企业标准低于本标准合格品规定指标和未经鉴定而成批投产的点火线圈产品不予定级。
This standard specifies the quality grading indicators, test methods, and quality inspection sampling methods for ignition coils for magnetos (hereinafter referred to as ignition coils).
This standard applies to product quality grading, quality spot checks, and supervision and inspection of ignition coils for various purposes (except aviation).
Ignition coil products are divided into three grades: qualified product, first-class product, and premium product, according to the different quality indicators achieved by their main performance.
When sampling and inspecting product quality, the normal inspection single sampling plan specified in GB/T 2828 shall be adopted.
Ignition coil products that have no enterprise standard, whose enterprise standard is lower than the qualified product indicators specified in this standard, or that have been put into batch production without appraisal shall not be graded.
Standard Timeline
Changes from replaced version:
- 增加了次级峰值电压
- 增加了初级、次级绕组直流电阻检查
- 增加了初级、次级绕组电感检查
- 增加了浸水试验
- 增加了下落试验
- 取消了冲击试验
- Added secondary peak voltage
- Added primary and secondary winding DC resistance check
- Added primary and secondary winding inductance check
- Added immersion test
- Added drop test
- Removed impact test