HJ/T 320-2006
Specifications for environmental protection product Rectifying power for high-voltage electrostatic precipitator
环境保护产品技术要求 电除尘器高压整流电源
Catalogue
前言 → 1 适用范围 → 2 规范性引用文件 → 3 技术要求 → 4 检验规则 → 5 标志、使用说明书 → 6 包装、运输、贮存 Foreword → 1 Scope → 2 Normative References → 3 Technical Requirements → 4 Inspection Rules → 5 Marking and Instruction Manual → 6 Packaging, Transport, and Storage
Scope
This standard specifies the requirements, test methods, inspection rules, marking, and transport packaging for high-voltage rectifying power for electrostatic precipitators. This standard applies to rectifying power for high-voltage electrostatic precipitators (hereinafter referred to as rectifying power), and also applies to high-voltage rectifying power for demisting, tar removal, and other environmental protection purposes.
本标准规定了电除尘器高压整流电源的要求、试验方法、检验规则和标牌、运输包装。本标准适用于高压静电除尘器的整流电源（以下简称整流电源），也适用于除雾、除焦油及其他环境保护用途的高压整流电源。
Normative References
Keywords
Application Summary AI generated
Manufacturers and users of rectifying power for electrostatic precipitators use this standard to ensure product technical performance and quality meet environmental requirements. It specifies design, manufacturing, inspection, and packaging guidelines, helping improve dust removal efficiency and reduce air pollution.
电除尘器高压整流电源的制造商和用户使用本标准来确保产品的技术性能和质量符合环保要求。该标准规定了整流电源的设计、制造、检验和包装运输要求，有助于提高电除尘器的除尘效率，减少大气污染。
AI Summary AI generated
This standard specifies technical requirements, test methods, inspection rules, marking, packaging, and transport for high-voltage rectifying power used in electrostatic precipitators. It applies to rectifying power for dust removal, demisting, and tar removal. Key requirements include operating environment, safety, efficiency ≥80%, power factor ≥0.8, and various tests (insulation, load, flashover). Inspection includes factory and type tests, with packaging and transport conditions defined.
本标准规定了电除尘器高压整流电源的技术要求、试验方法、检验规则及标志包装运输要求。适用于高压静电除尘器的整流电源，也用于除雾、除焦油等环保用途。标准涵盖运行环境、安全要求、技术性能（如效率≥80%、功率因数≥0.8）及多项试验（绝缘、负载、闪络等）。检验分出厂和型式检验，并规定了包装运输条件。
Key Sentences extracted from text
本标准规定了电除尘器高压整流电源的要求、试验方法、检验规则和标牌、运输包装。
整流电源应符合本标准的规定，并按照经规定程序批准的图样及技术文件制造。
运行地点无导电、爆炸尘埃，无腐蚀金属和破坏绝缘的气体和蒸汽。
设备效率 ≥80％
整流电源的输入交流电频率为50Hz，其波动范围不超过±2%；电压波动范围不超过额定值的±10%；
This standard specifies the requirements, test methods, inspection rules, marking, and transport packaging for high-voltage rectifying power for electrostatic precipitators.
The rectifying power shall comply with the provisions of this standard and be manufactured in accordance with the drawings and technical documents approved through the specified procedures.
The operating site shall be free of conductive and explosive dust, and free of gases and vapors that corrode metals or damage insulation.
Equipment efficiency ≥80%.
The input AC frequency of the rectifying power is 50Hz, with a fluctuation range not exceeding ±2%; the voltage fluctuation range shall not exceed ±10% of the rated value.
Standard Timeline
Changes from replaced version:
- 代替《中国环境保护产品认定技术条件 高压静电除尘用整流设备》（HCRJ 011-1998）
- Replaces 'Technical Conditions for Certification of China Environmental Protection Products Rectifying Equipment for High-Voltage Electrostatic Dust Removal' (HCRJ 011-1998)