HG/T 4253-2011
ActiveAcid green P-3BL (C.I. Acid green 27)
酸性绿P-3BL(C.I.酸性绿27)
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 要求 → 4 采样 → 5 试验方法 → 6 检验规则 → 7 标志、标签、包装、运输、贮存 Foreword → 1 Scope → 2 Normative References → 3 Requirements → 4 Sampling → 5 Test Methods → 6 Inspection Rules → 7 Marking, Labeling, Packaging, Transport, and Storage
Scope
This standard specifies the requirements, sampling, test methods, inspection rules, as well as marking, labeling, packaging, transport and storage of Acid green P-3BL (C.I. Acid green 27) products. This standard is applicable to the quality control of Acid green P-3BL products.
本标准规定了酸性绿P-3BL(C.I.酸性绿27)产品的要求、采样、试验方法、检验规则以及标志、标签、包装、运输和贮存。本标准适用于酸性绿P-3BL的产品质量控制。
Normative References
Keywords
Application Summary AI generated
Dye manufacturers and quality inspection agencies use this standard to regulate the production and testing of Acid green P-3BL products. It ensures that key properties such as shade, strength, and color fastness meet specified requirements, guaranteeing performance for textile dyeing applications. This standard is important for product consistency, consumer protection, and facilitating trade.
染料生产企业和质检机构使用该标准来规范酸性绿P-3BL产品的生产和检验。该标准确保产品在色光、强度、色牢度等关键指标上符合要求，从而保证下游纺织印染行业的使用效果。它对于统一产品质量、保障消费者权益和促进贸易具有重要意义。
AI Summary AI generated
This standard specifies the technical requirements for Acid green P-3BL (C.I. Acid green 27) dye, including appearance, strength, shade, moisture, water insolubles, solubility, dustiness, limits of harmful aromatic amines and heavy metals, and various color fastness properties on nylon fabric. It details sampling methods, test procedures (e.g., dyeing methods, color fastness tests), inspection rules, and packaging, transport, and storage requirements. It is intended for quality control and factory inspection of this dye product.
本标准规定了酸性绿P-3BL（C.I.酸性绿27）染料的技术要求，包括外观、强度、色光、水分、水不溶物、溶解度、防尘性、有害芳香胺和重金属限量，以及在锦纶织物上的多项色牢度指标。标准详细描述了采样方法、各项指标的试验方法（如染色法、色牢度测试）、检验规则和包装运输贮存要求。适用于该染料的质量控制和出厂检验。
Key Sentences extracted from text
本标准规定了酸性绿P-3BL(C.I.酸性绿27)产品的要求、采样、试验方法、检验规则以及标志、标签、包装、运输和贮存。
本标准适用于酸性绿P-3BL的产品质量控制。
染色时的一般条件应符合GB/T 2374-2007的有关规定。
酸性绿P-3BL在锦纶织物上的色牢度应不低于表2的规定。
如果检验结果中有一项指标不符合本标准的要求时，应重新自两倍量的包装中取样进行检验，重新检验的结果，即使只有一项指标不符合本标准要求，则整批产品判定为不合格。
This standard specifies the requirements, sampling, test methods, inspection rules, as well as marking, labeling, packaging, transport and storage of Acid green P-3BL (C.I. Acid green 27) products.
This standard is applicable to the quality control of Acid green P-3BL products.
General conditions for dyeing shall comply with the relevant provisions of GB/T 2374-2007.
The color fastness of Acid green P-3BL on nylon fabric shall not be lower than the provisions in Table 2.
If any indicator in the inspection results does not meet the requirements of this standard, sampling shall be repeated from double the quantity of packages for inspection; if even one indicator in the re-inspection results does not meet the standard requirements, the entire batch shall be judged as non-conforming.