GB/T 95-2002
ActivePlain washers--Product grade C
平垫圈 C级
Application Summary AI generated
GB/T 95-2002 specifies the dimensions, tolerances, and technical requirements for product grade C plain washers, which are flat, unhardened washers with a larger outer diameter relative to their inner hole. These washers are used in general mechanical assemblies and construction applications where load distribution and surface protection are needed, but high precision or tight tolerances are not critical. The standard applies to low-stress environments, such as fastening bolts and nuts in structural steelwork, agricultural machinery, or other non-critical industrial equipment.
Related Standards
GB/T 9074.20-2004
Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers
GB/T 62.1-2004
Wing nuts--Round wing
GB/T 9074.5-2004
Cross recessed small pan head screw andwasher assemblies with plain washers
GB/T 62.3-2004
Wing nuts--Pressing wing
GB/T 62.2-2004
Wing nuts--Square wing
GB/T 3098.20-2004
Mechanical properties of fasteners--Wing nuts with specified proof torque
GB/T 62.4-2004
Wing nuts--Die-casting wing
GB/T 3098.19-2004
Mechanical properties of fasteners--Blind rivets with break pull mandrel
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.