GB/T 8014.2-2005
ActiveAnodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part2:Mass-loss method
铝及铝合金阳极氧化 氧化膜厚度的测量方法 第2部分:质量损失法
Application Summary AI generated
This standard specifies the mass-loss method for measuring the thickness of anodic oxide coatings on aluminium and its alloys. It is applied in manufacturing quality control and laboratory testing to determine coating thickness by dissolving the oxide layer and calculating the mass difference. The method is used for components like architectural profiles, automotive parts, and consumer electronics where precise coating thickness verification is required.
Related Standards
GB/T 19356-2003
Thermal spraying--Powders--Composition and technical supply conditions
GB/T 9792-2003
Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
GB/T 4956-2003
Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
GB/T 19353-2003
Vitreous and porcelain enamels--Corrosion tests in closed systems
GB/T 9791-2003
Chromate conversion coatings on zinc，cadmium，aluminium-zinc alloys and zinc-aluminium alloys--Test methods
GB/T 4957-2003
Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
GB/T 19354-2003
Vitreous and porcelain enamels for aluminium--Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
GB/T 19355-2003
Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.